704635
11
Zoom out
Zoom in
Previous page
1/12
Next page
10
Troubleshooting
Problem Solution
The platter does not spin.
Is the AC adapter connected to the outlet? Connect the AC adapter to the outlet.
Has the belt slipped from the platter? Correctly place the belt on the platter.
Is the belt placed on the motor pulley? Check that the belt is placed on the motor pulley
(brass-colored) correctly.
Has the belt been damaged? Replace it with a new belt.
The platter spins, but there is
no sound or the volume is not
loud enough.
Are the function settings and input for connected equipment (amplifier, etc.) selected
correctly? Check whether the settings for the connected equipment are correct.
Is the stylus damaged? Check the stylus and replace it, if necessary.
Is the stylus placed correctly on the body of the cartridge? Check the cartridge and adjust it, if
necessary.
Are the setting positions for the pre-amplifier selector switch correct? Check that the pre-
amplifier settings are correct, noting the following common problems and their causes:
If there is no sound, or if the volume is not loud enough, the product is set to the “PHONO
position and connected to the amplifier’s AUX/LINE input.
If the volume is too loud or is distorted, the product is set to the “LINE” position, and the
connectable equipment is connected to the PHONO input.
The stylus skips.
Is the record warped? Check the record.
Is the record scratched? Check the record.
There is howling.
Is the product picking up excessive vibrations from the floor, surfaces of the walls, or nearby
speakers? Decrease the vibrations or mount the product on a surface that is not subject to the
effects of vibrations.
Is the product mounted on an unstable surface? Check whether the surface on which the
product is mounted is suitable.
There is noise when the
record is playing.
Is there dust on the cartridge’s stylus tip? If dust is stuck to the stylus tip, clean it with a
commercially sold brush.
The sound when the record
is playing is either too fast or
too slow.
Are the speed settings for this product correct? Use the platter speed button to select the
correct speed for the type of record being played.
Playback speed slows down
or there is irregular rotation.
Is the belt stretched out? Replace it with a new belt.
Dimensions
AT-L P60XUSB
AT-L P60XUSB
(Unit: mm)
359.5
373.3
97.5
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audio-Technica AT-LP60XUSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audio-Technica AT-LP60XUSB in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audio-Technica AT-LP60XUSB

Audio-Technica AT-LP60XUSB User Manual - German - 12 pages

Audio-Technica AT-LP60XUSB User Manual - Dutch - 12 pages

Audio-Technica AT-LP60XUSB User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info