704634
8
Zoom out
Zoom in
Previous page
1/14
Next page
7
Preparation for use
Rotating the platter
1. Using your hands, rotate the platter ten times.
Remove the tie that locks the tonearm and press the
tonearm lift button to lift the tonearm. Slowly rotate the
turntable ten times by hand in the direction of the arrow.
You may want to hold the tonearm to prevent it from
moving. This step is for resetting the auto mechanism,
getting rid of any twists in the belt and making sure the
belt rides smoothly along the drive rim on the underside of
the platter.
Setting pre-amplifier selector switch
This product has a built-in phono equalizer function. You can
use the product even if you do not have a phono amplifier or
connectable equipment with a built-in phono amplifier.
Use the pre-amplifier selector switch to set the output, as
shown below.
Connectable
equipment
being used
Position of
pre-amplifier
selector switch
Where to connect
RCA audio cable
Device with
phono input
PHONO Phono input
jack and ground
(earth) terminal
of connectable
equipment
Device without
phono input
LINE AUX or line input
jack of connectable
equipment
PC sound card LINE PC sound card’s line
input jack
*
*
An audio adapter (sold separately) may be required to connect the
RCA audio cable to the line input jack of the PC sound card.
Connecting the device
Align the settings for the pre-amplifier selector switch and
connect the RCA audio cable to an input jack that is compatible
with the connectable equipment you are using (amplifier,
receiver, active speakers, sound card, etc.).
The RCA audio cable's red jack is for the right (R) channel,
and the white jack is for the left (L) channel.
Connecting the AC adapter
This product does not have a power switch. A standby current
is always running through the product, even when it is not
being used; disconnect the AC adapter from the outlet when
not using the product for a long period of time.
1. Connect the AC adapter to the outlet.
Connect the AC adapter to the outlet without removing
the cartridge’s protector. If the platter has rotated, press
the STOP button without touching the tonearm, and then
wait until the tonearm returns to its original position.
AT-L P60XHP
AUX
L R
PHONO
L R
With PHONO
With PHONO
Without PHONO
Without PHONO
To outlet
To outlet
Connectable equipment
(Amplifier, etc.)
Tonearm
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audio-Technica AT-LP60XHP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audio-Technica AT-LP60XHP in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audio-Technica AT-LP60XHP

Audio-Technica AT-LP60XHP User Manual - German - 14 pages

Audio-Technica AT-LP60XHP User Manual - Dutch - 14 pages

Audio-Technica AT-LP60XHP User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info