704631
14
Zoom out
Zoom in
Previous page
1/17
Next page
13
Replacing a cartridge
Refer to the user manual for the cartridge that you will be using if you
are replacing the cartridge (AT-XP3) included with this product with
another, commercially available cartridge. After you replace the old
cartridge with a new one, you must readjust the overhang and the
tonearm’s balance and tracking force.
1. Release the headshell from the tonearm.
Use the clamp to secure the tonearm and then remove the headshell
gently.
2. Remove the stylus from the cartridge.
3. Remove the lead tips.
Be careful not to damage the lead tips.
4. Using a commercially sold, non-magnetic slotted screwdriver,
remove the installation screws, and then remove the cartridge
from the headshell.
5. Refer to the user manual for the new cartridge for mounting
instructions and connecting to the lead tips.
6. Using a commercially sold, non-magnetic slotted screwdriver,
tighten the screws in both places, and then adjust the overhang.
After the adjustments are complete, tighten the screws securely.
7. Attach the headshell to the tonearm.
8. Adjust the tonearm’s height.
Refer to “Adjusting the tonearm’s height” below while doing the
adjustments.
9. Adjust the tonearm balance and tracking force.
Refer to “Setting tonearm balance” and “Setting tracking force” on p.8.
Adjusting the tonearm’s height
When installing a cartridge other than the one provided, you must
maintain a suitable distance between the cartridge and the surface of
the record. Place the stylus on the record and confirm that the tonearm
is parallel to the record’s surface. If it is not parallel, adjust the height
of the tonearm.
1. Rotate the tonearm height lock to loosen the tonearm’s anchor.
2. Rotate the tonearm height adjustment dial and adjust the
tonearm’s height.
3. After the adjustments are complete, rotate the tonearm height
lock to set the tonearm.
When the turntable is moved
Using the product’s original packing materials, wrap the turntable in
the reverse order from when you unwrapped it. If you do not have the
packaging materials, take the following measures:
After unplugging the power cable plug from the outlet, remove the
platter, and then wrap it so that it does not get damaged. If the product
is moved while the platter is still seated, it may damage the spindle.
Fix the tonearm with the clamp.
Remove the counterweight.
Remove the headshell from the tonearm with the cartridge’s protector
attached, and then wrap the entire headshell assembly so that it does
not get damaged.
Wrap the turntable body with a soft cloth so that it does not get
damaged.
Plastic washers
Installation screws
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audio-Technica AT-LP140XP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audio-Technica AT-LP140XP in the language / languages: English as an attachment in your email.

The manual is 4,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audio-Technica AT-LP140XP

Audio-Technica AT-LP140XP User Manual - German - 17 pages

Audio-Technica AT-LP140XP User Manual - Dutch - 17 pages

Audio-Technica AT-LP140XP User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info