Page 4
7
Thumbwheel for
headlight range control
Press the knob lightly and turn
to the required setting:
0 Front seats occupied
I All seats occupied
II All seats occupied, luggage
compartment loaded
III Driver only, luggage
compartment loaded
8Air outlets
9Horn
10 Tiptronic controls
on steering wheel
for manual gear
selection
When the selector lever is in
position
DD
or
SS
, or in the manual
shift programme, you can shift
up or down to the next gear by
briefly pressing the upper or
lower part of either of the
switches.
11
Instruments and
warning/indicator
lamps
See also overleaf.
12
Seat heating
(front left seat)
Press the knob to switch on.
Turn the knob to adjust the
temperature.
25
Lever for adjustable
steering column
Pull lever down and adjust the
position of the steering column
as required. Then push it back
up as far as it will go.
26
Compartment for
Owner’s Manual and
Service Wallet
27
AIRBAG OFF
indicator lamp
The indicator lamp lights
up constantly if the front
passenger’s airbag has been
switched off by turning the key
in the switch located in the
glove box.
28 Handbrake
29
Central locking
switch
Press the appropriate symbol
to lock or unlock the vehicle
centrally from the inside:
lock
unlock
30
Controls for
navigation system
Please refer to operating
instructions.
31 Bonnet release lever
Please refer to Owner's Manual.
5
Light switch;
turn signal and
headlight dip lever
1 Right turn signals
(With ignition off:
right parking light on)
2 Left turn signals
(With ignition off:
left parking light on)
3 Main beam headlights
4 Headlight flasher
Cruise control system
To activate the system:
slide control
AA
to ON/EIN
position. Press button
BB
to store
the current speed and maintain
this speed constantly.
To switch off cruise control tem-
porarily:
press either the brake pedal or
clutch pedal, or slide control
AA
to OFF/AUS. To resume the
programmed cruising speed,
slide switch
AA
to RES/AUFN.
To switch off cruise control
completely:
slide control
AA
all the way over
to OFF/AUS until the click stop
engages.
6
Thumbwheel for
instrument lighting
21
Gear lever/selector
lever
Selector lever positions on
vehicles with automatic gearbox
P - Parking lock
R - Reverse gear
N - Neutral
D - Drive
S - Sport
To move the selector lever out of
position
PP
or
NN
, or into position
PP
or
RR
, press the interlock button
on the selector lever handle and
the brake pedal simultaneously.
Note:
Use the foot brake to hold
the vehicle when stationary with
the engine running (in all selec-
tor lever positions other than
PP
).
Warning:
Do not move the selec-
tor lever to positions
PP
or
RR
when the vehicle is moving.
Manual gear selection (Tiptronic)
The Tiptronic program enables
you to change gear manually.
To do this, move the selector
lever out of position
DD
into the
Tiptronic gate on the right. Press
the selector lever forwards
briefly to shift up a gear, or push
the lever back to shift down a
gear.
22 Switch compartment
Slide open lid for access to
switches:
Release switch for tank
flap
Release switch for tailgate
Deactivator switch for
interior monitor of alarm
system
13
Rear window
heating
14
Hazard warning
lights
15
Switch for ESP
(electronic stabilisation
programme)
16
Seat heating
(front right seat)
Press the knob to switch on.
Turn the knob to adjust the
temperature.
17 Radio cover panel
To open: lightly press lower
edge.
18 Lockable glove box
19
Air conditioner
controls
On/off control,
temperature setting
Press control to switch on;
pull control to switch off.
Defrost windows
Automatic mode
Blower speed
SSttaannddaarrdd sseettttiinngg ffoorr aallll sseeaassoonnss::
Select a temperature of 22 °C
and switch on automatic mode.
20
Ashtray with
cigarette lighter/
electrical socket
23
Windscreen wiper
and washer lever
0Off
1 Brief wipe
2 Intermittent wipe
Move control
AA
to alter the wiper
intervals.
3 Slow wiper speed
4 Fast wiper speed
5 Automatic wash and wipe
Pull lever towards you and hold.
Function selector switch
for on-board computer
Press the top or bottom of rocker
switch
BB
repeatedly to call up
the various displays. Press and
hold button
CC
to reset display to
zero.
Function selector for
display modes
Press button
CC
repeatedly to
select the following displays:
on-board computer and navi-
gation system, or to switch the
display off.
24 Ignition lock
