810507

ATTACK Pellet 30 Automatic Plus Manual

31
Zoom out
Zoom in
Previous page
1/60
Next page
29
2 Boiler settings
2.1 Preset boiler temperature
2.2 Weather control the boiler
Boiler temperature calculation according to the heating curve and outdoor
temperature sensor data during active equithermal operation.
2.3 Boiler heating curve
The heating curve takes into account the thermal parameters of the building.
Recommended boiler settings are: 1.8 - 4.
2.4 Curve shift
Allows correction - increase / decrease of temperature in a regulated heating circuit
with equithermal control switched on, when the heating curve does not fully
correspond to the characteristics of the building.
2.5 Pellet feeder settings - Output modulation
2.5.1 Limitation of max. boiler output
Limitation of maximum boiler output.
2.5.2 Energy density - Fuel calorific value
2.5.3 Fuel feeder performance
2.5.4 Feeding correction
Percentage of administration correction
2.5.5 Fan correction
2.5.6 Feeder efficiency test
2.5.6.1 Performance test time
Length of the feeder performance test. At the end of this time, weigh the fuel fed and
enter the value on the panel (net pellet weight).
2.5.6.2 Efficiency test time
Feeder efficiency test.
2.5.6.3 Fuel weight
Enter the weighed weight of the pellets in grams.
2.6 Fuel level
2.6.1 Alarm level
Amount of fuel at which the message appears: MINIMUM FUEL!
2.6.2. Fuel level calibration
Parameters for fuel quantity calibration. First of all, it is necessary to fill the tank and
select 100% FUEL. If a minimum amount of fuel remains in the tank after a certain period
of boiler operation, it is necessary to select FUEL QUANTITY 0%.
2.6.2.1 Fuel level 100%
2.6.2.2 Fuel level 0%
2.7 Burner cleaning - Maximum operating time
It is the time of continuous operation of the burner, after which the automatic switch-
off occurs, cleaned and again after the burner burns, if the conditions for re-operation
are met.
2.8 Cleaning schedule - Exchanger cleaning interval
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK Pellet 30 Automatic Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK Pellet 30 Automatic Plus in the language / languages: English as an attachment in your email.

The manual is 0.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATTACK Pellet 30 Automatic Plus

ATTACK Pellet 30 Automatic Plus User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info