810507

ATTACK Pellet 30 Automatic Plus Manual

19
Zoom out
Zoom in
Previous page
1/60
Next page
17
TECHNICAL DESCRIPTION OF BURNER
Burner operation is based on principle of pellets falling from pellet feeder through inlet
hose and inlet pipe on the grate to be burned. Burner is equipped with electric ignition
device, that automatically lights pellets fallen on the grate. Ignition begins, when
thermostat gives instruction to burner. The switch-on and switch-off temperature can be
set via the boiler electronics menu. Information about the current operating data is shown
on the electronics display.
Burner output is set from production for the range ofod 12–30 kW a is equipped with
automatic grate cleaning mechanism. When thermostat achieves re-quired
temperature, the burn-down cycle is started, the grate goes out to be cleaned by
scrap-ing. Thereby, the longer usage period is ensured, with no need to dismantle burner
from boiler body. Burner uses control system to regulate gear of ash removing auger and
gear of exchanger cleaning by turbulators. Boiler convection parts should be cleaned
periodically to keep high efficiency of heating. Burner is intended for combustion of wood
pellets with diameter of 6 mm. Burner is manufactured following the industrial norms
and prescriptions and it was tested and approved in conformity with directives
about low voltage devices and with directives about electromagnetic disturbance.
TECHNICAL DATA OF BURNER
Model PELH30Plus
Fuel Wood pellets, 6 mm
Mode 12–30 kW
For boilers with heating chambers up to 3 m²
Weight 28,5 kg
Main voltage Main current Hz
~230 V 10A fuse 50
WARNING! Electrical installation must be done by certified electrotechnician. Main
cables can be exchanged by approved electrotechnician only.
VOLTAGE AND ENERGY CONSUMPTION OF BURNER
Component Mains/Volt Max. voltage Fuse
Control electronics 230 V~ 6,3A
Ventilator 230 V~ 58 W
Grate cleaning 24 V DC 48 W
Ignition 230 V~ 600 W
External pellet feeder 230 V~ 38 W
Ash removing 230 V~ 38W
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK Pellet 30 Automatic Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK Pellet 30 Automatic Plus in the language / languages: English as an attachment in your email.

The manual is 0.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATTACK Pellet 30 Automatic Plus

ATTACK Pellet 30 Automatic Plus User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info