810513
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
Mechanical installaon
Check that there is an adequate signal of
the Wi-Fi network at the installaon point
of the WIFI modem and that there are no
metal/conducve surfaces nearby, since
they may aect recepon.
On DIN rail
The Connect Box can be installed on DIN rail, duly
preset. For easy hooking and release, pull the
indicated black hook�
NTC
OTM
OTS/TA
+24 Vdc
NON USATI
123 456
7
R
PORTE DI COMUNICAZIONE
STATO APPLICAZIONE
COMANDO DA WFC
STATO WI-FI
123 456
7
PORTE DI COMUNICAZIONE
STATO APPLICAZIONE
COMANDO
DA WFC
STATO WI-FI
R
R
MAC address
AB:01:CD:65:97:BD
123 456
7
COMMUNICATION GATEWAY
APPLICATION STATUS
WFC
CONTROL
WI-FI STATUS
R
MAC address
AB:01:CD:65:97:BD
On wall
Fit the plasc eyelets on the BOX body using
screws, then x the WIFI modem to the wall using
the expansion plugs. All the above menoned
material is supplied with the kit.
NTC
OTM
OTS/TA
+24 Vdc
NON USATI
123 456
7
R
PORTE DI COMUNICAZIONE
STATO APPLICAZIONE
COMANDO DA WFC
STATO WI-FI
123 456
7
PORTE DI COMUNICAZIONE
STATO APPLICAZIONE
COMANDO
DA WFC
STATO WI-FI
R
R
MAC address
AB:01:CD:65:97:BD
123 456
7
COMMUNICATION GATEWAY
APPLICATION STATUS
WFC
CONTROL
WI-FI STATUS
R
MAC address
AB:01:CD:65:97:BD
Electrical connecons
With WIFI modem not powered:
connect OTM terminals of the WIFI modem
to TA terminals of the boiler (see the Wiring
Diagram in the boiler’s booklet);
connect OTS/TA terminals of the WIFI
modem to "OT" no. 1-2 terminals of the
Opentherm termostat (see paragraph 1 of
its booklet)
NTC
OTM
OTS/TA
+24 Vdc
NON USATI
123 456
7
R
PORTE DI COMUNICAZIONE
STATO APPLICAZIONE
COMANDO DA WFC
STATO WI-FI
123 456
7
PORTE DI COMUNICAZIONE
STATO APPLICAZIONE
COMANDO
DA WFC
STATO WI-FI
R
R
MAC address
AB:01:CD:65:97:BD
123 456
7
COMMUNICATION GATEWAY
APPLICATION STATUS
WFC
CONTROL
WI-FI STATUS
R
MAC address
AB:01:CD:65:97:BD
Terminals
NTC Not used. The external temperature probe,
if present, must be connected to the boilers
board; the ambient temperature probe is
integrated in the Remote Control
OTM Signal connecon to the boiler
OTS
/TA
Signal connecon to the remote
control
+24Vdc Connector for power supply unit
Never connect any of the menoned
connecons to 230V power supply.
fInsert the power supply unit connector
(supplied with the kit) in the WIFI modem and
connect the power supply unit to a socket to
power everything up.
Conguraon
fRequired material:
WIFI modem powered and connected
Modem/router with Internet connecon
and acve WIFI network, funconing and
stably receivable at the installaon point of
the WIFI modem
Android smartphone or iOS device with
ATTACK Condens APP installed
fOperaon phases (preliminary summary):
1 - in the rst conguraon phase of the
WIFI modem, the modem itself creates a
temporary Hotspot, namely it generates a
WiFi network to be used only for:
entering, by means of the smartphone
and ATTACK Condens APP, the
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK OT81 WIFI modem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK OT81 WIFI modem in the language / languages: English as an attachment in your email.

The manual is 3.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info