810512
29
Zoom out
Zoom in
Previous page
1/48
Next page
29
1. INSTALLATION
1.1 WARNING
The installation must be carried out ONLY by skilled
and qualied people working in conformity to current
National and Local Directives and following the
instructions of this handbook.
Before starting the installation, verify that UC
power is o󰀨.
To connect RC21 correctly, arrange a dedicated
communication line according to current regulations
on electrical systems.
Refer to the electrical connections written in the UC
manual.
Notice: choose the most appropriate place for installation
in order to guarantee the correct room temperature survey.
It is recommended to install the device at approx. 150cm
height from the oor, away from doors, windows or heat
sources that could aect the gauging.
1.2 PROCEDURE
1. Remove the front of the remote control using a
screwdriver (picture 1).
2. Screw the back cover to the wall through eyelets,
using the supplied screws (picture 1).
3. Connect the remote control to the UC, by using
2x0.75 mm² (min 0.5 mm²) shielded cable, max
length 50m, possibly in a dedicated duct (picture 2).
The connection is not polarized.
4. Close the device pressing the front to the back cover
and powering the UC.
picture 1
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK OT80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK OT80 in the language / languages: English as an attachment in your email.

The manual is 1.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info