810499
24
Zoom out
Zoom in
Previous page
1/92
Next page
24
3.5 SETTING THE USER PARAMETERS
The menu for displaying and setting the user parameters is accessible after short pressing of the
OK button. The „+“ and „–“ buttons are used to browse in settings and parameters. The
appropriate parameter selected becomes adjustable by the „OK“ button and starts to flicker.
Then it can be changed by the „+“ and „–“ button and confirmed by „OK“. Some of the
parameters are only informative and they cannot be changed. To exit the menu, confirm the
[End] by „OK“ button. After remaining more than 1 minute without the user´s intervention, the
controller switches the display to the basic mode.
Table 2. User parameters:
Indication Parameter Min Max Step Prod. setting
C 45 Adjusted boiler temperature L65 H90 1 °C
co C Operating mode of the circuit pump (‘C’ – WINTER, ‘–‘ –
SUMMER)
C
C
cu u Operation of the D.H.W. pump (‘u’ – casual mode, ‘d’ –
elimination of legionella bacteria) u d u
u50° Current temperature measured in the accumulation tank or
D.H.W. tank
150
°
Current flue gas temperature
End Exit from user parameters
[C 45] – Adjusted boiler temperature– this is the value of boiler water temperature the
regulator is going to reach while in the WORK mode. It is set by turning the thermostat knob
manually (8) and shown briefly on the display (6).
[co C] – WINTER/SUMMER mode – the winter mode is indicated by the ‘C’ letter. Then is the
circuit pump controlled by the room thermostat and distributes the heat into the heating
system. The summer mode is indicated by the „–“ sign. Then is the circuit pump out of order and
the heat generated by boiler is only used to heat the D.H.W. tank. If there is not D.H.W. tank in
the system (additional sensor is not connected), it is not possible to select the SUMMER / WINTER
mode.
[cu u]Mode of D.H.W. tank warming –the regulator enables the casual D.H.W. tank warming
„u“ or the mode to eliminate the legionella bacteria „d“. After the „d“ mode is selected, the
temperature of 75 °C is achieved in the D.H.W. tank. When this temperature is achieved, the
controller switches into the mode of the casual D.H.W. tank warming „u“. The option of
elimination the legionella bacteria is not available, if the additional outlet and sensor are not set
for the D.H.W. warming.
CAUTION! Not to get hurt by the hot water, it is recommended to set this mode, when
the D.H.W. is not being used (e.g. during the night).
[u50°] Temperature of additional sensor– this is the value of current temperature of the
D.H.W. tank or of the accumulation tank of the heating system. This temperature is not displayed
in the user menu, if the additional output is not used.
[150°]Flue gas temperature – this value represents the current temperature of flue gas, if the
parameter for flue gas temperature is set in the service parameters.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK DPX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK DPX in the language / languages: English as an attachment in your email.

The manual is 11.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATTACK DPX

ATTACK DPX Additional guide - English - 21 pages

ATTACK DPX Additional guide - German - 21 pages

ATTACK DPX User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info