810499
39
Zoom out
Zoom in
Previous page
1/48
Next page
39
Falsch gemessene Werte der
Abgastemperatur Das Einschalten des Kessels ist möglich. Die Regelung
arbeitet mit der Menge der alternativen Luft V1 V2. Nach dem
Abbrand muss der Kessel manuell abgeschaltet werden!
Falsch gemessene Werte des
O2 Sensors (Lambda Sonde) Beim Anheizen wird die Liniengrafik nicht angezeigt.
Das Einschalten des Kessels ist möglich, der Regler arbeitet
mit Ersatzluft V1 und V2
Automatische Funktion der
Kesselabschaltung durch den
Abgassensor
Wenn der Kessel 30 Minuten eingeschaltet ist und die
Abgastemperatur innerhalb von 15 Minuten unter 25% sinkt,
schaltet sich der Kessel ab.
Das STB schaltet ein Abschaltung der Abnahme von verbliebener Wärme mit
Voraussetzung das die Kesseltemperatur < 85°C ist, Wenn die
Kesseltemperatur dann auf > 86°C steigt, schaltet sich die
Nutzung der verbleibender Wärme wieder ein.
Funktion des
Umschaltkontaktes Bei eingeschaltetem Kessel: WK/AK schließt sich
Bei ausgeschaltetem Kessel und Abgastemperatur <100°C:
WK/RK schließt sich
Fehler CPU Alle Relais schalten sich mit Hilfe von Hardware Watchdog ?
Frostschutz Bei ausgeschaltetem Kessel mit Temperatur < 7°C:
einschalten der Umlaufpumpe, Y1 und Y2 = 100%.
Falls die Kesseltemperatur auf 8 C steigt, schaltet sich die
Versorgungspumpe aus.
Y1=0%, Y2= 100%.
Schutz des Abgasventilators
und des Abgassensors vor der
Überhitzung
Abgastemperatur > 350°C, schaltet sich der Abgasventilator
aus
Abgastemperatur < 299°C, der Abgasventilator schaltet sich
ein
Kurzschluss der Taste „+“ Die Taste des Reglers reagiert auch bei erhöhtem Druck nicht
Funktion des Eingangs
(Menü) Nach der Sicherheitszeit fällt das Menu automatisch aus
Sicherheitstest Hält maximal 30 Minuten und beendet oder schaltet sich
automatisch aus, wenn: die Kesseltemperatur > 110°C ist oder
die Taste + für 30 Sekunden nicht gedrückt war.
Betriebsskala der
automatischen Einstellung
von Rücklauf auf den
bestimmten Wert
Zwischen 60°C und 80°C
Betrieb ohne Einstellungen
durch den Techniker gesteuert Der Regler stellt sich nach der Herstellereinstellung ein
Datenspeicherung Nur bei genügender Energie > 160V.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK DPX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK DPX in the language / languages: German as an attachment in your email.

The manual is 1.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATTACK DPX

ATTACK DPX Additional guide - English - 21 pages

ATTACK DPX User Manual - English - 92 pages

ATTACK DPX Additional guide - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info