Manual ATTACK DPX Combi Pellet (page 39 of 100) (English)

810510

Zoom out

Zoom in

1/100

7.10 DISASSEMBLY OF THE REGULATOR

If it is necessary to disassemble the regulator, do the following:

• turn the main switch off

• disconnect the boiler from electricity mains

• demount the regulator

• demount the connectors from the regulator

7.11 TECHNICAL SPECIFICATION OF THE REGULATOR

Power supply 230 V

10 %, 50 Hz

Input (not including the ventilator and pumps) < 4 VA

Range of measuring the boiler temperature −9 – 109 °C

1 °C

Range of measuring the flue gas temperature −30 – 500 °C

1 °C

Max. input of devices connected to the regulator 2 A/230 V

7.12 OUTPUT CONTROL OF ATTACK DPX COMBI PELLET

Adjustment of burning in the boiler

The burning is adjusted by the primary and secondary

regulation flap. Producer sets the boilers to the opti-

mum conditions of burning with reference to the emis-

sions and flue gas temperature. Only the service staff

trained by producer can make the adjustment.

Optimum setting of the regulation flaps – wood

mode (Primary/Secondary):

DPX25CP – 50/40

DPX30CP – 50/25

DPX35CP – 50/50

DPX40CP – 100/60

DPX45CP – 100/60

7.13 OPERATION WITH PERMANENT BURNING

It is possible to keep the permanent burning, i.e. the fire in the boiler for the whole night without

need to heat up during the day, but only in the winter period. This method of operation reduces

the life of the boiler.

For the operation with permanent burning it is necessary to prepare the boiler in the fol-

lowing way:

• Lay some bigger wood logs (4 – 6 pcs.) on a glowing layer of fuel

• Close the mixing valve partly – temperature of water in the boiler achieves 80 – 90 °C

• The regulation flap controlled by thermal regulator is automatically closed and the fan is

stopped.

After the boiler is prepared in this way, the burning is kept for more than 12 hours. When

the boiler is in the operation of permanent burning, the water temperature must be

80 – 90 °C.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK DPX Combi Pellet in the language / languages: English as an attachment in your email.

The manual is 8.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATTACK DPX Combi Pellet Manual

Product: