648618
64
Zoom out
Zoom in
Previous page
1/77
Next page
58
Appendix
The announcement
message is not clear.
When recording the announcement, make sure you
speak in a normal tone of voice about nine inches
from the telephone base.
Make sure there is no background noise (television,
music, traffic, etc.) when recording.
The messages on the
answering system are
incomplete.
If a caller leaves a very long message, part of it may
be lost when the system disconnects the call after
three minutes.
If the caller pauses for more than seven seconds,
the system stops recording and disconnects the call.
If memory is full while recording a message, the
answering system announces, “Memory is full
and then hangs up. You need to delete some old
messages in order to make room for new messages.
If the caller enters your priority code, the answering
system stops recording and announces, “Please wait
a moment.“ (See Priority call on page 50.)
If the caller’s voice is very soft, the system may stop
recording and disconnect the call.
The messages are
very difficult to hear.
Slide the VOL switch to increase the speaker
volume.
The answering
system does not
respond to remote
commands.
Make sure you are using the correct remote access
code (see Feature summary on page 16).
Make sure you are calling from a touch-tone
telephone. When dialing a number, you should hear
tones. If you hear clicks, then it is not a touch-tone
telephone and cannot activate the answering system.
The answering system might not detect the remote
access code when your announcement is playing.
Wait until the announcement is over before entering
the code.
There might be interference on the telephone line you
are using. Press the dialing keys firmly when dialing.
Troubleshooting
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATT CL4939 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATT CL4939 in the language / languages: English as an attachment in your email.

The manual is 10,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info