769373
48
Zoom out
Zoom in
Previous page
1/67
Next page
Atomos Ninja V – User Manual Edition 1: Aug 2021 46
The Monitor Features will only be illuminated and available if there is
an input signal detected.
Using Waveform Monitoring tools (WFM)
Luma Waveform
The Luma or Luminance Waveform is a great way to visualize the dynamic
range of your image, allowing you to protect exposure of both your highlights
and shadow detail. It’s particularly useful when shooting with a low contrast
LOG curve and works in perfect partnership with HDR to illustrate and
highlight the clipping point to allow you to correctly expose you image.
RGB Waveform
RGB Waveform will monitor the level of Red, Green and Blue from an input
source. The RGB channels are displayed side by side and each channel color is
shown under the corresponding waveform. This can be used to check the white
balance. Just point the camera at something white and the Red, Green and Blue
levels should match if white balance is setup correctly on the camera.
Vectorscope
The Vectorscope display shows color information of hue (shown as a
phase vector), and saturation (measured by outward distance from the
center). This is useful for checking if an image is under or over saturated
and for calibrating multiple cameras to ensure greater consistency
between shots.
Waveform Monitor Settings
To access Waveform Monitoring settings simply touch on the Settings
icon and select the Waveform Tab.
To change the size of the waveform, press on the 1/4, 1/3 or
Full Screen icons and the display will update immediately.
Waveform Size settings
The Brightness slider directly controls the intensity of the waveform while
the opacity slider adjusts the transparency values of the waveform
display on screen. Experiment with these controls to achieve your desired
monitoring setup.
Frame Guides
Cine, TV and Social frame guides
Safe Areas
Action area and title safe areas displayed.
Anamorphic Desqueeze
Allows you to see a correctly squeezed image when using
anamorphic lenses
Settings
Press to access settings for monitoring tools
The Waveform Monitor will remain on screen when hiding the
overlays ensuring the focus remains on calibrating your image. If
the MON button is pressed the WFM will move in to the bottom icon
line up.
To toggle between Waveform Monitor sizes of 1/4, 1/3 and Full
Screen during monitoring, recording and playback, tap in the
bottom left corner of the screen. You can also adjust the brightness
and opacity of the waveform display whilst recording, monitoring or
during playback.
9. Monitoring & Recording
BrightnessOpacity
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atomos NinjaV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atomos NinjaV in the language / languages: English as an attachment in your email.

The manual is 29.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atomos NinjaV

Atomos NinjaV User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info