769373
44
Zoom out
Zoom in
Previous page
1/67
Next page
Atomos Ninja V – User Manual Edition 1: Aug 2021 42
This menu allows you to display an input as a scaled
input overlay in the corner of the screen over the top of
any program output, so that they both appear on screen
at the same time. You can use this feature to present to
the camera, whilst showing the viewer another angle, a
presentation or pre-recorded content at the same time.
In order to see the PiP appear over another input, a
connected display in Program mode is required.
Picture in Picture On/Off
Enable/Disable the Picture in Picture function by tapping
the On/Off switch.
Opacity
Use the slider to adjust the opacity of the PiP input.
PiP Size
Allows you to select the size of the PiP effect by tapping
on one of the two preset sizes: small or large.
Set PiP Position
Adjust the position on screen for the picture in picture
effect to be displayed.
PiP Input
Select the input that will appear as a PiP over the input
that is live.
The system automatically disables PiP when it is
not required, such as in situations where you would
have a PiP image displayed over the same image.
The PiP is not recorded onto the SSD/HDD inserted
in the Ninja V during record mode. To record the
PiP, connect an external recorder to PGM Out of the
AtomX CAST
This menu allows you to customize your settings
for switching.
Switch With
Allows you to select the style of switching to use whilst
in the Switcher mode. Tapping Switch With or the F4
button, cycles between the options:
One Touch
In this mode, a single touch on one of the inputs
on the Ninja display when in multiview mode, or
on one of the physical 1-4 buttons on the AtomX
CAST, will switch to the corresponding input
immediately. The input on screen will have a red
border around it and the corresponding button on
the CAST will turn red when selected, to indicate
that it is live. The F4 button will also be red in One
Touch mode.
Two Touch
Two touch recording, follows the traditional
broadcast preview and program switching style,
which allows you to preview an input before
actually switching to it. Whilst in this mode, the
program feed on the Ninja V display will have a
red border and the corresponding input selection
button on the AtomX CAST will also be red.
Tapping on another input will place a green
preview border around the chosen input on the
display, and the corresponding input selection
button on the AtomX CAST will also be green. This
indicates that the input is being previewed as the
next source to cut to. The selected input will also
be displayed on a connected display that is in
preview mode.
A second tap on the same input on the display or
on the input selection button whilst they are green,
will cut to that input immediately. If you select
another input instead, that will cause that input to
be previewed instead. If you do not wish to switch
to the input being previewed, tap on the program
feed again on the Ninja V display or press the input
selection button that is red.
SwitcherPiP
8. Using the AtomX CAST
Picture in Picture (PiP) Switcher
PiP Switcher
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atomos NinjaV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atomos NinjaV in the language / languages: English as an attachment in your email.

The manual is 29.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atomos NinjaV

Atomos NinjaV User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info