769373
9
Zoom out
Zoom in
Previous page
1/67
Next page
Atomos Ninja V – User Manual Edition 1: Aug 2021 7
Choosing your power source
The Ninja V can be powered by the included AC-powered Battery
Eliminator, or by using a compatible DC battery. If you are the owner of
other Atomos devices, the batteries you have for these devices
(NP-F series) will be compatible with your new Ninja V.
Battery Eliminator
Included in the Ninja V box is a Battery Eliminator. This connects directly to
the battery slot of your Ninja V and enables AC power connection. Please
note the Battery Eliminator is suitable for use with Atomos devices only and
is compatible with the Atomos coiled DC to D-Tap cable.
Batteries
We recommend the use of optional Atomos NP-F type batteries and the
Atomos Power Kit with the Ninja V. The Ninja V can also use standard NP-F
compatible batteries. Charge new batteries before using them, using a
compatible battery charger. To attach the battery, gently slide it down into
the slot until it locks into position. To remove a battery, push the latch to
release it.
Before any type of disposal the battery should be discharged
completely. Tape the contacts with electrical tape and package so as
to prevent contacts accidentally coming together at any time.
Incineration must be performed by an approved and permitted waste
treatment facility that handles lithium ion batteries. If you are not sure if
your waste facility can handle lithium ion batteries, contact them and
verify if they are permitted or not.
Atomos NP-F Battery Charger (optional)
The Atomos NP-F Battery Charger has been designed to rapidly charge
the batteries yet be lightweight so that is easy to travel with.
In the unlikely event of a charge error the rst and fast red LEDs ashing
quickly.
Fast charging of the battery is possible up to 80% capacity and the
remaining 20% will then charge at a slower rate to maintain good
battery life.
Batteries do not charge in a linear way. At rst they charge very
quickly, and then the rate slows down to a trickle. While charging,
one or more red lights will blink. When 90% charge is reached, all the
lights will ash. It is perfectly OK to use the batteries at this point and
we recommend stopping at this stage for the longest battery life. If
you leave the batteries on charge after all four lights are ashing, the
charger goes into trickle charging mode for the nal 10%. Eventually,
when trickle charging is complete, and the batteries are at 100%
charge, all the lights will go out.
Choosing the right battery for your application
Size Cells Battery Life*
5200mAh 4Up to 2.0hrs
7800mAh 6Up to 3.0hrs
Battery Eliminator - Continuous AC
D-Tap - Source dependent
* Battery life tested during Monitor/Record 4Kp60 operation.
We recommend using Atomos NP-F series batteries.
DC to D-Tap Coiled Cable
An optional Atomos accessory is a DC to D-Tap Coiled Cable. This is
designed to allow you to power your device from an external battery
system. To use this simply connect the D-Tap connector to your power
source. Ensure that the output of the power source does not exceed
16.8V DC.
Ninja V batteries and modular accessories are held in place tightly
because they are on the outside of the device, this is to ensure
there is no possibility whatsoever that they work loose, so you may
have to be quite rm with the battery latches. We suggest that you
familiarize yourself with the force required to remove the batteries
and accessories so that you can do this quickly in the eld.
Battery slot
Gently slide
down into battery
slot and lock into
position
Push the release
button to unlock
the battery and
slide battery
upwards to
remove.
4. Connecting and Powering Up
Powering the AtomX CAST
When you have an AtomX CAST connected to your Ninja V, the 12V-3A
AC power supply that was included with your Ninja V supplies power for
both Ninja V and AtomX CAST. Connect the DC connector to the DC input
on the AtomX CAST to provide power to both devices. For more
information on the AtomX CAST connections, refer to the Ninja V
Connections section.
Connecting the AtomX CAST to your Computer
The AtomX CAST connects to your computer via USB-C and appears
instantly to the computer as a webcam. Connect one end of the supplied
USB-C cable to the USB-C port labelled CAST USB-C on AtomX CAST
and the other end to a USB-C port on your computer. If your computer
only has USB Type-A connectors, a USB-C to USB-A adapter will be
required. Once connected, you will be able to select the AtomX CAST as
a camera and audio source within video applications like Zoom, Teams
andSkypewithouttheneedtoinstalldriversonthecomputerrst.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atomos NinjaV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atomos NinjaV in the language / languages: English as an attachment in your email.

The manual is 29.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atomos NinjaV

Atomos NinjaV User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info