553035
8
Zoom out
Zoom in
Previous page
1/11
Next page
Quick Guide – External Mixer Setup
Building on the basic setup …
First you will need some different cables.
Two (2) 1/8” (3.5mm) stereo plug to Stereo RCA (Male) plugs
A. Change the Output from Headphones to External
Mixer
B. Leave the channel assignment drop-down with
the default.
[Left deck : Left chan / Right deck : Right chan]
C. Change the Soundcard from Mono-Separated to
the 4.1 Card option.
You will need to plug each of the cables above
into the respective BLACK and GREEN outputs of
the soundcard. If your card only has GREEN,
RED, and BLUE output jacks then your card is
not a 4.1 surround card and you will need to use
the Mono-separated option instead.
D. Plug the other end of the cables into the Line
inputs of the appropriate channels on the
Mixer.
Typically, the GREEN output of the sound card is
the FRONT output (Left deck [Chan 1]) and the
BLACK is the REAR output (Right deck [Chan 2]).
E. Back in VirtualDJ, click on the Apply button to
set the changes.
F. Click on the Options tab of the Config dialog.
G. From the Left hand list, the first item listed is
Crossfader. This controls the crossfader curve
of the internal VirtualDJ mixer. Since an exter-
nal mixer is being used and all crossfading of the
tracks will be done externally, set the internal
crossfader to DISABLED.
With the VirtualDJ internal crossfader disabled,
this will allow the audio to flow freely from in
VirtualDJ to the external mixer channels.
H. Click OK to close the Config dialog.
That is it …
quick and simple …
External Mixer Setup!
As mentioned if you are using a more Professional
Grade soundcard the settings are very similar. You
can choose from the following options under the
sound card drop-down depending on the drivers
that are being used.
4.1 card - Windows Driver Model (WDM) support
ASIO card - Audio Stream Input/Output driver
support (Lower Latency)
* See brand names like ESI, Hercules, M-Audio, ECHO, etc. for
various ASIO supported multi-channel sound cards to choose
from.
When planning your use for Timecode control of
VirtualDJ, you are going to want a soundcard that is
supported with ASIO drivers. The card also needs
to not only have 4 Mono (2 Stereo) outputs it also
needs to have 4 Mono (2 Stereo) inputs.
The inputs must be STEREO, VirtualDJ’s Timecode
interface does not support sending a MONO signal
of the timecode to the software.
So let’s setup your system
for using Timecode …
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atomix Virtual DJ 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atomix Virtual DJ 6 in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atomix Virtual DJ 6

Atomix Virtual DJ 6 User Manual - English - 64 pages

Atomix Virtual DJ 6 User Manual - German - 64 pages

Atomix Virtual DJ 6 Quick start guide - Dutch - 16 pages

Atomix Virtual DJ 6 User Manual - Dutch - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info