Manual ATN TASC Series (page 23 of 36) (English)

580228

Zoom out

Zoom in

1/36

3-3

3.1.6. PROGRAM TOUR

Tour is a function that camera could automatically move among

some presets according to a programmed route and dwell time after

calling it.

• Five tour(100,101,102,103,104) is available in this product.

• Each tour have 16 presets. If the presets are less than 16, the

last preset number should be set 119 ,then exit. If the presets

are more than 16, system will automatically save the former 16

presets. The dwell time must be set more than 3 seconds. If the

dwell time is less than 3 seconds, the system will automatically

set 3 seconds as default dwell time.

Case 1: Set the first tour which includes 5 presets. The number of

the five presets are 1 → 10 → 15 → 16 → 21, dwell time is 6 sec-

onds.

• Set preset 100 which corresponding to the first tour (please

refer the section about how to set preset)

• Set preset 6 which corresponding to the dwell time.

• Set preset 1 (the tour consists of preset 1)

• Set preset 10 (the tour consists of preset 10)

• Set preset 15 (the tour consists of preset 15)

• Set preset 16 (the tour consists of preset 16)

• Set preset 21 (the tour consists of preset 21)

• Set preset 119 (exist the tour programming)

• Press ACK and SHOT at the same time to exit setting status.

3.1.7. CALL TOUR

Call tour 1 by calling preset 100, Call tour 2 by calling preset 101,

call tour 3 by calling 102, call tour 4 by calling preset 103,call tour 5

by calling preset 104.

Case 2: The Tour 1, which have five presets in the order like 1 → 10

→ 15 → 16 → 21, and the dwell time of ever preset is six seconds,

was programmed.

Call preset 100 which corresponding to tour 1 (please refer the sec-

tion about how to call preset).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATN TASC Series in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATN TASC Series Manual

Product: