Manual ATN PS28 (page 45 of 48) (English)

580229

Zoom out

Zoom in

1/48

A-1

APPENDIX A

HOW TO SELECT SCOPE MOUNTING SYSTEM

REQUIRED FOR YOUR DAYTIME SCOPE

By selecting the appropriate Scope Mounting System (with In-

serts) you can mount the PS28 onto a daytime scope with an ob-

jective tube diameter from 47 to 58,7 mm. At the Table 2-1 Scope

Mounting System sizes (#1-2) and Insert sizes for different scope

examples are provided.

If your specific daytime scope is not listed in Table 2-1, before

mounting procedure you have to select the proper Scope Mount-

ing System (and Insert) required.

To do this, perform the following actions:

1. Determine your daytime scope objective tube diameter (exter-

nal - not diameter of the glass lens) with a metric ruler (with a tram-

mel for more accurate results) as shown in Figure B-1.

2. Select from the Table 2-1 the Insert size closest (larger) to the

value measured (Insert size is also specified at an Insert body).

Do the selection in Insert group that corresponds to the same

Scope Mounting System (for ex-

ample, Scope Mounting System

#2).

3. The Scope Mounting System

you need is the one that corre-

sponds to Insert size selected at

the Table 2-1.

For example, if your scope ob-

jective tube diameter is equal to

56 mm then you should select

Insert with size of 56 mm and

corresponding Scope Mounting

Systems #1 from the Table 2-1.

FIGURE B-1.

OBJECTIVE TUBE DIAMETER

MEASURING

0.5 mm

1 2 3 4 5 6 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATN PS28 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATN PS28 Manual

Product: