580229
37
Zoom out
Zoom in
Previous page
1/48
Next page
3-5
ITEM
NO.
INTER-
VAL
LOCATION
CHECK/
SERVICE
PROCEDURE
NO T FU LLY
MISSION
CAPABLE IF:
NOTE
If any of the following items are damaged it does not cause the entire
end item to be “not fully mission capable”. However, the damaged
item should be replaced as soon as practical to restore full capability
of the system.
OPERATIONAL CHECKS
CAUTION
Operate the PS28 with Front Lens Cap on or under dark conditions.
17 Before/
After
Instal-
lation
security
Check the sight which
installed on the rail or day-
scope lens does not have
any movement. Tighten
fixing nuts if necessary.
18 Before/
After
Function
Switch
Insert the battery. Turn the
switch to ON position. Look
for green glow in output
lens. Turn the switch to
OFF position.
Green glow
absent.
19 Before/
After
Remote
control
Connect the remote control
to the sight. Turn the func-
tion switch to STB position.
Press and hold the key.
Look for green glow in
output lens. Release the
key; turn the switch to OFF
position.
Green glow
absent.
20 Before/
After
Viewed
Image
Refer to paragraph 2.4.
to inspect for operational
defects.
Flickering, flash-
ing, edge glow,
or shading is
observed.
AFTER CHECKING PROCEDURES
21 Before/
After
Replace protective covers
on the lenses. Disconnect
the remote control and
screw up the cap. Remove
the battery. Return the
sight and all accessories to
the storage case.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATN PS28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATN PS28 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info