580229
21
Zoom out
Zoom in
Previous page
1/48
Next page
2-5
3. Insert the output lens into the scope mounting system and place
the rail of the mounting system where the Quick Release Mount
was above the battery compartment of the sight.
4. Apply a small amount of thread locker on threads, install two
screws M4x8 and tighten it.
5. Loosen the nut of the mounting system.
6. Slide the PS28 with mounting system onto the objective lens of
dayscope up to the stop.
7. To complete the installation of the mounting system to your day-
scope, use a screw driver to tighten the nut of the mounting sys-
tem. Do not apply excessive torque.
2.1.4. LONG RAIL ADAPTER
Optional Long Rail Adapter (LRA) can be used if the firearm has
a short scope mounting rail which prevents the installation of the
PS28 forward of dayscope.
Install the PS28 with LRA as follows (Figure 2-5):
1. Slightly loosen the two fixing screws (1) on the LRA (2).
2. Place the LRA on the mount of the fire arm (3).
3. Tighten the fixing screws of LRA.
4. Install the daytime scope (4) onto the LRA.
FIXING NUT
DAYSCOPE OBJECTIVE LENS
INSERT
SCOPE MOUNTING SYSTEM
FIGURE 2-4. PS28 INSTALLED ON DAYSCOPE OBJECTIVE LENS
RAIL FOR IR 450
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATN PS28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATN PS28 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info