580226
5
Zoom out
Zoom in
Previous page
1/8
Next page
4
FOCUSING
To focus your riflescope you will need to adjust the
diopter first thing. Simply turn the diopter clockwise
until it stops. Then, while looking through the diop-
ter at a subject, slowly turn the diopter back counter
clockwise until the grain in the image is sharp.
NOTE: We suggest that you focus the diopter during
daylight with the filter on.
Next, focus the front lens until the image and the
grain are both sharp. When you are in the low-light
conditions and the daylight filter is off you may focus
the front lens to receive a sharp image, the diopter should not be adjusted.
NOTE: The front lens should be readjusted as you view objects at different distances.
IR ILLUMINATOR
IInfra-red (IR) Illuminators are common for night vision technology. The IR light greatly
enhances the performance of your scope, while remaining almost totally invisible to the
naked eye. In dark environment, power up the scope. Now, find a scene and examine it
without the IR on then with IR powered up. Note the difference in illumination. It is impor-
tant to remember that the IR illuminator is simply an infra red light source, and like any light
source it may loose its effectiveness over a great distance.
For installation of the IR illuminator onto the riflescope use the picatinny rail of the scope.
The IR illuminator control buttons are located on its side. To switch the Digital IR illuminator
on/off press “+” and “-” buttons simultaneously. When the IR illumina-
tor is switched on you can see the green LED lit. By pushing the buttons “+” and
“-” you may adjust the IR brightness.
The IR beam is focusable to change the field of coverage. To change the beam width slightly
turn the IR lens.
You could change the IR control panel fitting your needs. The wrench included into the set
should be used for weakening the fixing nut located on the IR. Rotate the IR placing at in the
most convenient position. Tighten the nut with the wrench to fix the new position.
RANGEFINDER RETICLE
Aries MK410 reticle gives a clearly aiming point, even when
hard-to-see game blends into the background. Thinner posts
and crosshairs center section covers a minimum of the target
and allow for less target coverage, making precision shots on
small targets easy.
Heavy posts stand out against cover and leads your eye
directly to the center intersection. The result is fast precision
aiming.
±5 Diopter
Focusing system
IR Brightness
Adjustment
Battery
Housing
Fixation
Screw
IR Elevation
IR Windage
IR Focusing
The thin lines
correspond to
1.25 yards at 100
yards distance
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATN Aries MK410 Spartan at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATN Aries MK410 Spartan in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info