810414
66
Zoom out
Zoom in
Previous page
1/72
Next page
EN
www.atmos.cz
66-EN
Operation and Maintenance Manual - EN
21. List of spare parts
POSITION PART DESCRIPTION
QUANTITY
CODE 1 pc
1A Burner body - front part A45 1 H0401
1B Burner body - rear part A45 - for GSP and SPT boilers 1 H0449
2
Burner cover A45 for boilers GSP and SPT- hood with a window for the display - AC07X
1H0450
3 Top cover of the burner mouth 1 H0404
4 Holder of the electronic unit 1 H0221
5A Electronic unit of the burner - AC07X with a xation plate + AC07X-C 1H0310
5B AC07X-C additional module 1H0337
6 Pellet supply pipe 1 H0406
7 Safety thermostat 95 °C 1 H0059
8 Safety thermostat cover 1 H0224
9 Holder - plate with openings for the ignition spirals 1 H0407
10 Ignition spiral 500 W 2 H0229
11 Ignition spiral cover 1 H0408
12 Inner holder of the ignition spiral 1 H0409
13 Combustion chamber (pot) of the burner 1 H0410
14 End switch - FR501 1 H0210
15 Burner connector - 6-pin - male - complete (power) 1 S0989
16 Burner connector - 6-pin - female - complete (sensors) 1 S0987
17 Socket for the external conveyor 1 H0211
18 Air ap of the fan 1H0411
19 Fan with a speed sensor 1 H0411
20 Photocell - entire old Danfoss (Siemens) / new ATMOS FT01 1
H0231/H0330
21 Photocell holder 1H0232
22 Electronic unit connector (1 - 12) - top 1 H0260
23 Electronic unit connector (1 - 16) - bottom 1 H0234
24 Electric harness of the burner, incl. bushings and connectors 1 H0233
25
Bushing for the cable for the end switch, safety thermostat and TS and TV sensors
5S1191
26 Gasket under the ange of the pellet supply pipe - Sibral paper 1S0181
27 Screw for xation of the hood 4,2 x 13 (with tip) 6S1010
28 Screw for xation of the burner body 4.2 x 13 (with drill) 12 S0881
29 Screw for xation of the AD04 module and pneumatic cleaning lid (without tip) 5S1028
30 Fan attachment screw M4 x 8 4 S1002
31 Screw for attachment of the pellet supply pipe M5 x 10 3 S0879
32 Screw for attachment of the safety thermostat cover M4 x 6 1 S0878
33 Screw for attachment of the end switch and safety thermostat cover M4 x 30 3 S0877
34 Screw for attachment of the conveyor socket and fan ap 3.9 x 9.5 6S0876
35 Screw for top cover and ignition spiral plate M6x12 (stainless) 3 S0880
36 Nut M6 4S0798
37 Display self-sticking label 1 H0236
38 End switch stop 1 H0412
39 Sealing for photocell Ø 8/15 1 S0155
40 Sealing under fan 84 x 94 1 S0157
41 Servo drive for the burners air ap 1P0074
42
A45 Burners air ap - for GSP and SPT boilers for servo drive
1H0451
43 Sealing between air ap and A45 burner body -
for GSP and SPT boilers
1S1615
44 Module AD04 1P0446
45 2-pin connector for additional cable (R3 and R4) 1 S1090
46 Gasket under cover (lid) of the opening for pneumatic clening 1S1031
47 Cover (lid) of the opening for pneumatic clening 1S0996
- Fuse for ignitaton spiral - type F 3.15A/1500A/5x20 mm 2 H0238
- Fuse for conveyor - type F 0.8A/1500A/5x20 mm 1 H0239
- Fuse for fan - type F 1.0A/1500A/5x20 mm 1 H0251
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atmos A45SPT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atmos A45SPT in the language / languages: English as an attachment in your email.

The manual is 6.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info