810410
5
Zoom out
Zoom in
Previous page
1/76
Next page
Operation and maintenance manual - EN
EN
www.atmos.eu EN-5
2. Design
Description
Heating with pellets with the use of the ATMOS A45 pellet burner has a lot in common with natural gas
or oil heating. However, there is a difference that burning of pellets produces a certain quantity of ashes that
must be removed from the burner and boiler in an interval to avoid impairment of efficiency or affecting the
functionality of the burner.
The ATMOS A45 pellet burner is supplied with automatic fuel ignition as standard. The assembly of the
burner, external conveyor and fuel bin work completely automatically during operation and is controlled by an
electronic control unit with the use of a flame sensor (photocell). In the burner body the fuel and combustion
air are supplied in such a way to ensure maximum efficiency and environment-friendliness of fuel burning.
Only high-quality pellets with the diameter of 6 to 8 mm and length of 5 to 25 mm should be fed into
the burner. Pellets made of soft wood without bark, called white pellets, are considered as high quality
pellets.
Ashes are normally removed from the burner through the open door once every 7 to 30 days as necessary.
It is recommended to thoroughly clean the inner parts of the burner once a year; for this operation the burner
should be removed from the boiler. For ideal cleaning of the combustion chamber (pot) of the burner you can
use a special vacuum cleaner or a poker.
The burner consists of the following parts:
CAUTION - For the A45 burner DRA50 external shaft conveyors with the length of 1,7,
2,5, 4 and 5m with the diameter of 80 mm
are designed
or compact set of AZPD (AZPU)
tank with DRA25 conveyor.
1 - End switch
2 - Safety thermostat 95 °C
3 - Display of the electronic unit of
the burner
4 - Combustion chamber (mouth) of
the burner
5 - Socket for the external conveyor
6 - connector for interconnection cable
between the boiler and the burner (power cable)
(L1, L2, N, PE, R a R2)
7 - connector for connection of TS, TV, TK and TSV
sensors
3
6 5
2
4
1
7
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atmos A45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atmos A45 in the language / languages: English as an attachment in your email.

The manual is 5.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atmos A45

Atmos A45 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info