810413
59
Zoom out
Zoom in
Previous page
1/72
Next page
Operation and Maintenance Manual - EN
EN
www.atmos.cz EN-59
13 ALARM SAFETY Disconnected end switch on the
burner body
Disconnected safety thermostat
(95°C (55 °C for boilers Dxx-
PX, PXxx)) on the supply pipe
of pellets to the burner due to
burning of poor-quality pellets
that produce cake and prevent
trouble-free burning of pellets
in the burner mouth the supply
hose gets subsequently clogged
and the temperature at the safety
thermostat rises
Clogged flue gas exhaust from
the boiler caused by obstructed
flue gas ways in the boiler, flue
gas duct or chimney by dust and
soot; the clogging causes return
flow of flue gas and heat to the
pellet supply hose and subse-
quent disconnection of the safe-
ty thermostat.
Blown fuse for the fan
(0.8A - 1.0A)
Properly tighten the burner to
the boiler and check the con-
tact of the end switch. Check the
function of the sheet-metal stop
of the end switch
Clean the combustion chamber
of the burner, if necessary, emp-
ty the supply hose of pellets, turn
off and on the main switch on the
boiler
Clean the combustion chamber
of the burner every day until you
have good-quality pellets made
of wood without bark (white pel-
lets) that do not produce cake
and where it is sufficient to clean
the burner mouth once every 2 to
4 weeks
Clean the whole boiler, flue gas
duct and chimney from dust and
soot, turn off and on the main
switch on the boiler
Check and change tha fan with
the fuse
14 HIGH FLUE
TEMP.!
This is not an error, but a message
that notifies the operator that the
maximum set temperature of flue
gas has been exceeded
If this message appears when
installing sensors TV and TS
on the accumulation tank - it is
a warning that has not yet been
activated function control burn-
er (boiler) by two sensors on the
accumulation tank (S15 = 2)
They have been interchanged
on the terminal board
Clean the boiler and then turn
off and on the main switch on
the boiler to clear the error
message
S15 parameter set from the
factory setting (S15 = 1) to the
value S15 = 2 - turn off and on
the main switch on the boiler
to clear the error message
Change the connection of the
sensor on the terminal board
and turn off and on the main
switch on the boiler to clear
the error message
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atmos A25SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atmos A25SP in the language / languages: English as an attachment in your email.

The manual is 4.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info