613626

Atlantic Maradja Manual

8
Zoom out
Zoom in
Previous page
1/26
Next page
Thank you for choosing this device. It has undergone many tests and inspections to ensure its quality. We hope that
you will be completely satisfied.
Some recommendations
Please read the documentation before starting to install the panel heater.
Disconnect power before working on the panel heater.
Conserve the documentation, even after installation of the panel heater.
Equipment specification : (indicated on the label of the device):
IP24 : Equipped protected from water splashes.
Class II : Double insulation.
: Appliance in accordance with the European Directive 2002/96/CE (DEEE).
INSTALLATION OF THE PANEL HEATER
1) Where to install the panel heater ?
11
11
1
22
22
2
33
33
3
- This equipment was designed to be installed in a residence. Please ask
your distributor before using it for any other purpose.
- The panel heater should be installed according to normal trade
practice and in compliance with legislation in the relevant country (the
IEE Wiring Regulations).
- Comply with the minimum clearance distances as indicated in diagram
(schemas
22
22
2
and
33
33
3
) for positioning of the panel heater. Never use
the shelf for vertical equipment.
- If your wall covering is laid on foam, a spacer the same thickness
as the foam must be placed under the panel heater’s support. This
ensures there is free space behind the panel heater to make sure its
control settings are not adversely affected.
- Do not install the panel heater:
➫➫
➫➫
➫ In a draught likely to affect the control settings (under a
fan, etc.).
➫➫
➫➫
➫ Under a fixed mains power socket.
➫➫
➫➫
➫ In zone 1 of bathrooms.
➫➫
➫➫
➫ In the bathroom, if the controls can be operated by a
person using the shower or the bath.
Except in the UK. Please refer to the IEE Regulations
601-06-01 and 601-08-01 (BS7671).
2) How to install the panel heater ?
2-1) Mount the wall support
- Place the bracket on the floor.
44
44
4.1/
44
44
4 bis
- Mark the holes, to determine the position of the lower attachments.
- Raise the bracket, making the previously marked holes coincide so
that you can locate the remaining two holes
44
44
4
.2/
44
44
4
bis
- Drill holes and bracket fix
44
44
4
.2/
44
44
4
bis
- Fit the wall support with 4 screws (horizontal model) or 6 screws
(vertical model) having a maximum diameter of 6.
N
ote : Do not use the device in mobile or feets or on casters.
(diagram
44
44
4 ter).
11
11
1
22
22
2
44
44
4
33
33
3
Devices must not be installed above an altitude of
1000 m as the altitude causes the air outlet temperature
to rise (by around 10°C per 1000 m difference in level).
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atlantic Maradja at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atlantic Maradja in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 6,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info