732959
26
Zoom out
Zoom in
Previous page
1/44
Next page
EN - 26
6 SHIPMENT AND
REPOSITIONING
6.1 Transportation and Changing
Positioning
The original packaging and foam may be
kept for re-transportation (optional).
Fasten your appliance with thick
packaging, bands or strong cords and
follow the instructions for transportation
on the packaging.
Remove all movable parts (shelves,
accessories, vegetable bins, and so on)
or x them into the appliance against
shocks using bands when re-positioning
or transporting.
Always carry your appliance in the
upright position.
7 BEFORE CALLING AFTER-
SALES SERVICE
Your fridge is not operating
Check if:
There is power
The plug is correctly connected to the
socket
The plug or mains fuse has blown
• The socket is faulty. Examine this by
plugging your fridge into a working
socket.
The appliance performs poorly
Check if:
The appliance is overloaded
The doors are closed properly
There is any dust on the condenser
There is enough space near the rear and
side walls.
Your fridge is operating noisily
Motor noise: Indicates the compressor
is operating normally. The compressor
may cause more noise for a short time
when it is rst activated.
Bubbling noise and splash: Due to
the ow of the refrigerant in the tubes of
the system.
Air blowing noise: Indicates normal
operation of the system due to the
circulation of air.
There is a build-up of humidity inside
the cooler
Check if:
All food is packed properly. Containers
must be dry before being placed in the
fridge.
The fridge door is opened frequently.
Humidity of the room enters the fridge
when the doors are opened. Humidity
increases faster when the doors are
opened more frequently, especially if the
humidity of the room is high.
The door is not opening and closing
properly
Check if:
There is food or packaging preventing the
door from closing
The door compartments, shelves and
drawers are placed properly
The door joints are broken or torn
Your fridge is level.
Recommendations
If the appliance is switched off or
unplugged, wait at least 5 minutes before
plugging the appliance in or restarting
it in order to prevent damage to the
compressor.
If you will not use your fridge for a long
time (e.g. in summer holidays) unplug it.
Clean your fridge according to chapter
cleaning and leave the door open to
prevent humidity and smell.
If a problem persists after you have
followed all the above instructions,
please consult the nearest authorised
service centre.
The appliance you have purchased is
designed for domestic use only. It is not
suitable for commercial or common use.
If the consumer uses the appliance in a
way that does not comply with this, we
emphasise that the manufacturer and
the dealer will not be responsible for any
repair and failure within the guarantee
period.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atlantic ATLKSW122A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atlantic ATLKSW122A in the language / languages: English, German, French as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info