475732

Atika VT36 Manual

18
Zoom out
Zoom in
Previous page
1/119
Next page
17
Possible faults
Before each fault clearance
− switch off device
− wait until the drum is stationary
− pull out main plug
After each fault clearance, put into operation and recheck all security installations.
Fault Possible cause Remedy
 no power  Check power supply, power socket and fuse
protection
 Extension cable defect  Check extension cable, exchange defect cable
immediately
 Main plug, motor or switch defect  Have main plug, motor or switch checked by an
approved electrician or replaced by original
spare parts
Device doesn't start
 Protective motor switch has tripped 1. Work depth too deep  reduce work depth
2. Drum blocked  remove the blockage
3. Grass too long  mow the grass
 Allow the motor to cool down approx. 15
minutes before continuing to work
 Extension cable defect  Check extension cable, exchange defect cable
immediately
 Internal fault.  Please contact the after sales service.
The device operates with
interruptions
 ON/OFF button defective.  Please contact the after sales service.
 Drum is blocked  Remove the blockage
 Toothed belt slips  Please contact the after sales service.
Unusual sounds
 Loose screws, nuts or other fasteners  Tighten all parts; contact customer service if the
noises continue to occur.
 Cutting blade damaged or dull  Please contact the after sales service.
 Work depths too deep  Set a lower work depth
Unusual vibrations
 Lawn too high  Mow the lawn before thatching
 Work depth too low  Set a greater work depth
 Dull blades  Please contact the after sales service.
Unsatisfactory verticulating
result
 Discharge opening blocked  Empty the grass catching bag and remove the
blockage
 Lawn too high  Mow the lawn before thatching
Technical data
Type
VT 36 VT 36
Model
VT 40 VT 40
Motorrating P
1
1600 W
S6 – 40%
2000 W
S6 – 40%
Mains voltage / Mains frequency
230 V~ / 50 Hz
Mains fuse
10 A inert
No-load speed n
0
2800 min
–1
Working width
362 mm 393 mm
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika VT36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika VT36 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info