520146
16
Zoom out
Zoom in
Previous page
1/108
Next page
15
Remove dust and dirt with a cloth or a brush.
Clean the vent slots after each use.
Clean the machine only dry.
Do not use solvents for the synthetic parts (petrol, alcohol,
etc.) as these can damage the synthetic parts.
L Never use any grease!
Use environmentally acceptable spray oil.
Storage
pull out main plug
Store unused equipment in a dry, locked place out of the
reach of children.
Before extended storage, please observe the following to
increase the service life of the device and to ensure smooth
operation:
thoroughly clean the device
Technical data
Type KSG 220 A
Model KSG 220 A
Motor rating P
1
220 W
Cutting speed v ~ 40 m/s
Mains voltage / Mains frequency 230 V~ / 50 Hz
Hand-arm vibration a
vhw
3,52 m/s
2
Grinding wheel
Ø x thickness x hole Ø Ø100 x 3,2 x Ø 10 mm
(Ø 100 x 4,5 x Ø 10 mm)
Weight appr. 2 kg
, Description of device / spare parts
Position Denomination Order-No.
1.
Rotary table, complete 363702
2.
Supporting table 363703
3a/3b.
Mounting screw (with spring) 363704
4.
Chain stop 363705
5.
Guide plate 363706
6.
Guide rail
7.
Locking nut 363707
8.
Setting screw (for grinding depth) 363708
9.
Grinding wheel (100 x 3.2 x 10 mm) 363709
10.
Cover 363710
11.
Handle 363711
12.
ON-OFF Switch 363712
13.
Grinding head 363713
14.
Screw cap 363729
15.
Nut M8, self-locking 391037
16.
Flange 363715
17.
Safety label 363716
18.
1 pair of carbon brushes (not shown) 363717
19.
Grinding wheel (100 x 4.5 x 10 mm) 363718
20
Protective cover 363720
21.
Nut
Guarantee
Please observe the enclosed terms of guarantee.
Possible faults
Before each fault clearance
switch off device
wait for the shutdown of the grinding wheel
pull out main plug
After each fault clearance, put into operation and recheck all security installations.
Fault Possible cause Remedy
Chain sharpener does not operate. Â no power
 Extension cable defect
 Main plug, motor or switch defect
 Check power supply, power socket and fuse
protection
 Check extension cable, exchange defect cable
immediately
 Have motor or switch checked by an approved
electrician or replaced by original spare parts
Chain sharpener grinds with interruptions
 Extension cable defect
 Internal fault.
 ON/OFF button defective.
 Check extension cable, exchange defect cable
immediately
 Please contact the after sales service.
 Please contact the after sales service.
Grinding wheel becomes hot
 Grinding wheel is dull or defective  Replace grinding wheel
Motor is humming, grinding wheel stops
 Grinding wheel is blocked  Remove object
Unusual vibrations
 Grinding wheel is defective  Replace grinding wheel
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika KSG220A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika KSG220A in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Finnish as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info