475726
27
Zoom out
Zoom in
Previous page
1/179
Next page
26
Possible faults
Before each maintenance and cleaning work
switch off device
wait for stop of chain saw
pull out main plug
After each fault clearance, put into operation and recheck all security installations.
Fault Possible cause Removal
Chain saw does not initiate after
switching on
 Chain brake
 no power
 Extension cable damaged
 Main plug, motor or switch defect
 Release chain brake
 Check power supply, power outlet,
fuse protection
 Check extension cable, exchange
defect cable immediately
 Have motor or switch checked by an
approved electrician or replaced by
original spare parts.
Chain saw works with interruptions  external loose connection
 internal loose connection
 Circuit closer/breaker defect
 Please contact the after sales
service.
Chain saw picks, vibrates or does not
saw correctly
 Chain edgeless
 Chain worn
 Chain tension
 Chain not assembled correctly (teeth
face to wrong direction)
 Chain must be regrinded or
exchanged
 Exchange chain
 Check and adjust chain tension
 Assemble chain again
Chain saw does not work with full
power
 Extension cable too long or diameter
too small
 Power outlet to far away from main
connection
 Use extension cable with sufficient
diameter
 Use power oulet which is nearer
within the working area
Saw chain gets hot  no oil in the tank
 oil flow canal blocked
 chain tension too high
 Chain edgeless
 Refill oil
 Clean oil flow canal
 Adjust chain tension
 Chain must be regrinded or
exchanged
no saw chain lubrication  no oil in the tank
 oil flow canal blocked
 Refill oil
 Clean oil flow canal
Description of device
/
/
s
s
p
p
a
a
r
r
e
e
p
p
a
a
r
r
t
t
s
s
Position Order number Denomination
Position Order number Denomination
1 362645 Sword
13 362923 Chain wheel
2 362992 Saw chain
14 Oil flow canal
3 362623 Chain brake release
15 Upper chain clamping boring
4 362624 Front handhold
16 362626 Claw stopper
5 Trip switch
17 Rear handhold
6 Circuit closer/breaker
18 362921 Chain protection
7 Ventilation slots - motor
19 362622 Safety label
8 Apparatus cable with plug
20 362627 Carbon brush set (without pict.)
9 362610 Oil tank lock
21 362928 Saw chain oil 100 ml
10 362625 Cover
22 Chain clamp (without pic.)
11 Fastening screw
400144 Saw chain oil 1 l (without pic.)
12 Chain tension ring
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika KS2201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika KS2201 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info