475722

Atika KS2000 Manual

26
Zoom out
Zoom in
Previous page
1/158
Next page
25
Cleaning
Clean the chain saw thouroughly after each application so
that the faultless function is kept.
Clean the case with a soft brush or a dry cloth.
Water, solvents and polishing agents shall not be
applied.
Pay attention to that the ventilation slots for the motor
cooling are free (risk of overheating).
After a lomger application period (1 – 3 hours)
disassemble the cover, the sword and the chain and
clean them with a brush.
In case of harder pollution or resins put the chain for
some hours in a container with chain cleaner.
Afterwards wash up the chain with clear water.
Remove all adhering substances with a brush from the
chain wheel and the sword fastening.
Clean the oil flow canal with a clean cloth.
T
T
r
r
a
a
n
n
s
s
p
p
o
o
r
r
t
t
Remove mains plug before each
transport.
Transport the chain only with the chain protection put
on.
Storage
Store unused equipment in a dry, locked place out of
the reach of children.
To extend the service life of the saw and guarantee
smooth operation, before storing for a longer period
thoroughly clean the chain saw
Remove the oil from the oil tank.
Hint:
Some chain oils tend to encrustations after a longer
period. For this reason the oil system should be
flushed before a longer storing with a chain saw
cleaner. Fill the cleaner up to the middle (appr. 50
ml) into the oil tank. Close the tank. Switch on the
chain saw without assembled sword and chain until
the complete cleaner has left the oil opening of the
chain saw.
Put the saw chain for a short time into an oil bath
and enwrap it afterwards in an oil paper.
G
G
u
u
a
a
r
r
a
a
n
n
t
t
e
e
e
e
We grant a guarantee of two years, commencing with
the day of delivery from the dealer's store, for material
and manufacturing faults.
Warranty claims, even during the warranty period, will
not be accepted for damages due to incorrect handling
or inadequate packaging during return of the devices or
to a non-observance of the operating instructions.
Faulty parts must be sent to our works, postage or
freight free. We reserve the right to decide upon free
spare part delivery.
Guarantee work will be completed by us or an
authorised servicing agency. Guarantee damage can
only be remedied by another firm with our explicit
approval.
The guarantee does not cover the normal wear of the
saw chain, sword, chain protection, chain wheel and
carbon brushes.
Guarantee is also granted if original spare parts are
used.
Subject to changes in the interest of technical progress.
Technical data
Typ KS 2000/40
Motor rating P
1
2000 W
Mains voltage 230 V~
Mains frequency 50 Hz
No-load speed 6800 min
–1
Mains fuse 16 A inert
Length of sword 400 mm
Saw chain speed 13.5 m/s
Oil tank volume max. 110 ml
Protection class ΙΙ /
Braking time of the chain brake 0.1 sec.
Gewicht approx. 5,7 kg
measured sound power level L
WA
103 dB (A)
guaranteed sound power level L
PA
105 dB (A)
(measured according to regulation 2000/14/EC)
24
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika KS2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika KS2000 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Finnish as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info