520784
14
Zoom out
Zoom in
Previous page
1/141
Next page
13
Contents
Declaration of conformity 13
Extent of delivery 13
Symbols machine / original instructions 13
Characteristics noise values 13
Vibrations 14
Normal intended use 14
Residual risks 14
Safety instructions 14
Preparing for commissioning 16
Commissioning 16
Adjusting the saw 17
Working with the saw 17
Maintenance and cleaning 18
Transport 18
Storage 19
Guarantee 19
Possible faults 19
Technical data 20
Spare parts / Description 20
EC Declaration of Conformity
according to EC directive: 2006/42/EC
We,
ATIKA GmbH & Co. KG
Schinkelstraße 97, 59227 Ahlen - Germany
herewith declare under our sole responsibility that the product
Kapp- und Gehrungssäge (Crosscut and Mitre Saw)
Model KGS 210 N
Serial number: 000001 - 020000
is conform with the above mentioned EC directive as well as
with the provisions of the guidelines below:
2004/108/EC and 2006/95/EC
Following harmonized standards have been applied:
EN 55014-1:2006/+A1 :2009;
EN 55014-2:1997/+A1:2001/+A2 :2008;
EN 61000-3-2:2006/+A1 :2009/+A2 :2009;
EN 61000-3-3:2008; EN 61029-1:2009; EN 61029-2-9:2009
Duly authorised person for the complilation of technical
documents:
ATIKA GmbH & Co. KG – Technical department
Schinkelstr. 97 – 59227 Ahlen – Germany
Ahlen, 05.07.2011 A. Pollmeier, management
Extent of delivery
Crosscut and mitre saw KGS 210 N (preassembled unit)
Dust bag
Accessories bag
Original instructions
After unpacking, check the contents of the box
! That it is complete
! Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Symbols machine
Carefully read
operator’s manual
before handling the
machine. Observe
instructions and
safety rules when
operating.
Shut off engine
and remove
power cord be-
fore performing
cleaning, mainte-
nance or repair
work.
Risk of injuries of
fingers and hands
by the saw blade
Do not expose to
rain. Protect
against humidity.
Wear eye and ear
protection
Wear dust mask.
This product com-
plies with Europe-
an regulations
specifically appli-
cable to it.
Machine of the
protection class II
(double insulat-
ed)
Symbols Original instructions
Threatened hazard or hazardous situation. Not ob-
serving this instruction can lead to injuries or cause
damage to property.
L
Important information on proper handling. Not ob-
serving this instruction can lead to faults in the machine.
User information. This information helps you to use all
the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Characteristic noise values
DIN EN ISO 3744 / DIN EN ISO 11202 / ISO 7960 Appendix A
Use of machine as crosscut and mitre saw with standard saw
blade.
Noise power level
Sound pressure level at the workplace
L
WA
= 102 dB(A) L
PA
= 89 dB(A)
The factor of measurement uncertainty is 3 dB.
The values given are emission values and must therefore not simulta-
neously represent safe workplace values too. Although there is a
relationship between emission and immersion levels, it can be reliably
deduced whether additional precautionary measures are necessary or
not. Factors, which can influence the immersion level currently existing
at the workplace include the duration of the effects, the special type of
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika KGS210N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika KGS210N in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info