520124
24
Zoom out
Zoom in
Previous page
1/96
Next page
22
Fault Possible cause Remedy
Engine is sputtering.
(runs erratically)
Choke lever set to “ Position X Set choke lever to “ Position Y
Spark plug connector not firmly placed on. Firmly place on the spark plug connector.
Vent in the tank cap blocked. Clean the tank cap and the vent.
Fuel old or contaminated. Drain the fuel into a container outdoors. Fill the tank with
fresh and clean fuel.
Incorrect carburetor adjustment. Have the caburetor adjusted correctly.
Decreasing engine power.
Machine overloaded. a) Reduce material feeding.
b) Do not exceed the max. branch diameter.
Machine is blocked. Thoroughly clean inside the machine.
Air filter contaminated. Clean or replace filter elements
Internal fault. Contact the manufacturer or the responsible customer
service respectively.
Cutting performance decreases.
Knife edges became blunt. Turn the knife or replace it with a new set of knives.
Beaters worn. Replace the beaters.
V-belt slipping. Tension the V-belt.
Branches are not automatically
drawn in into the side hopper.
Knife edges became blunt. Exchange knives.
Unusual noise or vibrations.
Screws, nuts or other parts loosened. Tighten the parts.
If the parts can not be tightened or noises remain:
Contact the manufacturer or the responsible customer
service respectively
G
G
u
u
a
a
r
r
a
a
n
n
t
t
e
e
e
e
Please observe the enclosed terms of guarantee.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika GHB760A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika GHB760A in the language / languages: English, German, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info