Manual Atika DKV400 (page 16 of 99) (English, German, Dutch, Danish, French, Italian, Swedish)

520783

Zoom out

Zoom in

1/99

Contents

Assembly of the saw 2 – 4

Declaration of conformity 5 – 6

Extent of delivery 14

Device description 14

Technical data 14

Symbols used in the operating instructions 15

Characteristic noise values 15

Normal intended use 15

Residual risks 16

Safe working 16

Preparation for commissioning 17

Commissioning 18

Adjusting the saw 18

Working instructions 19

Maintenance and care 19

Transport 19

Storage 20

Guarantee 20

Possible faults 20

Spare parts 20

Symbols machine

Carefully read

operator’s

manual before

handling the

machine.

Observe in-

structions and

safety rules when

operating.

Shut off engine

and remove power

cord before perfor-

ming cleaning,

maintenance or

repair work.

Risk of injury of

fingers and hands

by the saw blade

Wear eye

protection

Symbols used in the operating instructions

Threatened hazard or hazardous situation. Not

observing this instruction can lead to injuries or cause

damage to property.

Important information on proper handling of the

saw. Not observing this instruction can lead to faults in

the saw.



User information. This information helps you to use all

the functions of the saw optimally.

Assembly, operation and servicing the saw. Here

you are explained exactly what to do.

Characteristic noise values

DIN EN ISO 3744; 11/95, DIN EN 11201

Application of the machine as scroll saw with standard saw

blade.

Sound levels: Sound levels at the workplace

No-load

= 75 dB(A) L

= 63 dB(A)

Load

= 88 dB(A) L

= 76 dB(A)

The values given are emission values and must therefore not simulta-

neously represent safe workplace values too. Although there is a

relationship between emission and immission levels, it can be reliably

deduced whether additional precautionary measures are necessary or

not. Factors, which can influence the immission level currently existing

at the workplace include the duration of the effects, the special type of

the workroom, other noise sources, etc. e.g. the number of machines

and other adjacent processes. The permissible workplace values can

also vary from country to country. This information should however

enable an improved assessment of the danger and risk to be carried

out.

Normal intended use

 The saw is suitable for working with small and complex

forms of wood, plastics, plexiglass or hard plaster.

 Round materials (logs, pipes, etc.) are not permitted to be

cut without a special device for this purpose.

 Only workpieces which have been securely mounted and

aligned can be processed.

 The intended usage also includes compliance with the

operating, servicing and repair conditions prescribed by

the manufacturer and following the safety instructions

included in the instructions.

 The relevant accident prevention regulations for the

operation as well as the other generally acknowledged

occupational medicine and safety rules must be complied

with.

 Any other use is deemed not to be use as prescribed. The

manufacturer is not liable for any type of damage resulting

from this: the user bears the sole risk.

 Independently made alterations to the circular saw preclude

any liability of the manufacturer for resulting damages of any

kind.

 The circular saw may only be equipped, used and serviced

by persons who are familiar with these and have been

instructed in the hazards. Repair works may only be carried

out by us or by a customer service agent nominated by us.

 The machine may not be used in a potentially explosive

environment or be exposed to the rain.

 Metal parts (nails, etc.) must be removed from the timber to

be sawn.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Atika DKV400 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish as an attachment in your email.

The manual is 3,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Atika DKV400 Manual

Product: