520796
9
Zoom out
Zoom in
Previous page
1/80
Next page
9
Do not operate machine before having read the
operating instructions, understood all the notes and
assembly the machine as described here.
Keep the instructions in a safe place for future use.
Contents
Declaration of conformity 9
Extent of delivery 9
Characteristics noise values 9
Operating times 9
Symbols: machine 9
operating manual 10
Normal intended use 10
Risidual risks 10
Safety working 10
Assembling 11
Before the first start-up 12
Start-up 12
Working with the saw 12
Maintenance and cleaning 13
- Changing the saw blade 13
- Replacing the plastics insert 13
- Replacing the recuperating spring 13
Transport 13
Storage 13
Guarantee 14
Possible faults 14
Technical data 14
Description of device / spare parts 14
EC Declaration of Conformity
according to EC directive 2006/42/EC
We,
ATIKA GmbH & Co. KG
Schinkelstraße 97
59227 Ahlen - Germany
herewith declare under our sole responsibility that the product
Log saw BWS 400
Serial number: see last page
is conform with the above mentioned EC directives as well as with the
provisions of the guidelines below:
2004/108/EC and 2006/95/EC
Following harmonized standards have been applied:
EN 60204-1:2006; EN 1870-6:2002+A1:2009; EN 55014-1:2006;
EN 55014-2:1997+A1; EN 61000-3-2:2006: EN 61000-3-11:2000
EC type examination carried out by :
TÜV Rheinland Product Safety GmbH
Keeping of technical documents at:
ATIKA GmbH & Co. KG – Technical department – Schinkelstr. 97
59227 Ahlen – Germany
Ahlen, 26.05.2010 A. Pollmeier, management
Extent of delivery
1 Pre-assembled device unit 1 Support extension
1 Saw blade ( 400 mm)
1 Saw blade cover
1 Jigging device
Length stop
2 Handle
Mounting accessories
Saw blade casing
Operating manual
Cover
After unpacking, check the contents of the box
¾ That it is complete
¾ Check for possible transport damage
Report any damage or missing items to your dealer, supplier or the
manufacturer immediately. Complaints made at a later date will not be
acknowledged.
Characteristics noise values
DIN EN ISO 3746 / DIN EN ISO 11202 / ISO 7960 Appendix A
Use of the machine as log saw for firewood with standard saw blade.
Noise power level Sound pressure level at the workplace
Load L
WA
= 98 dB(A) L
pA
= 96 dB(A)
The factor of measurement uncertainty is 4 dB.
The values given are emission values and must therefore not simultaneously
represent safe workplace values too. Although there is a relationship between
emission and immersion levels, it can be reliably deduced whether additional
precautionary measures are necessary or not. Factors, which can influence the
immersion level currently existing at the workplace include the duration of the
effects, the special type of the workroom, other noise sources, etc. e.g. the
number of machines and other adjacent processes. The permissible workplace
values can also vary from country to country. This information should however
enable an improved assessment of the danger and risk to be carried out.
Operating times
Before initiating the device please observe the provisions pertaining to
corresponding laws (regional provisions) for the noise control.
Symbols machine
Carefully read opera-
tor’s manual and the
safety instructions be-
fore starting the
machine and observe
the instructions when
operating.
Shut off engine and
remove power cord
before performing
cleaning, maintenance
or repair work.
Risk of injuries of
fingers and hands by
the saw blade
Wear protective gloves!
Wear eye and ear
protection
Wear safety shoes
Electrical devices do not go into the domestic rubbish.
Give devices, accessories and packaging to an eco-
friendly recycling.
A
ccording to the European Directive 2002/96/EC on
electrical and electronic scrap, electrical devices that are
no longer serviceable must be separately collected and
brought to a facility for an environmentally compatible
recycling.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BWS 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BWS 400 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info