519915

Atika BTH Manual

14
Zoom out
Zoom in
Previous page
1/100
Next page
13
Symbols operating instructions
Threatened hazard or hazardous situation. Not observing this
instruction can lead to injuries or cause damage to property.
L
Important information on proper handling. Not observing this
instruction can lead to faults.
User information. This information helps you to use all the
functions optimally.
Assembly, operation and servicing. Here you are explained
exactly what to do.
Normal intended use
This construction circular saw is exclusively designed for lengthwise and
cross cutting of solid wood and plate material such as chipboard, wood
core plywood and MDF plates with square or rectangular cross section in
the open outside of enclosed areas using carbide tipped circular saw
blades acc. to EN 847-1.
The thickness of the wood material must not exceed:
BTK/BTH 400: 126 mm
BTK/BTH 450: 150 mm
BTK/BTH 500: 175 mm
The diameter of the saw blade must be within the values below:
BTK/BTH 400: 395 – 400 mm
BTK/BTH 450: 445 – 450 mm
BTK/BTH 500: 495 – 500 mm
Cross cuts may only be performed in conjunction with a mounted cross-
cutting fence.
Only materials that can be safely placed are allowed to be cut.
The use of saw blades made of HSS steel (high-alloy high speed steel) is
not permitted since this steel is hard and brittle. Risk of injury through saw
blade breakage and expulsion of saw blade pieces.
Normal intended use also includes the observance of the manufacturer's
operating, maintenance and repair conditions, as well as strict adherence
to the safety inspections listed in the instructions.
The relevant accident prevention regulations for the operation as well as
the other generally acknowledged occupational medicine and safety rules
must be complied with.
Any other use does not conform with the normal intended use of the
circular saw bench. The manufacturer is not liable for any resulting
damage; the user bears all risks!
Unauthorized modifications to the saw preclude any liability of the
manufacturer for resulting damages of any kind.
The saw may only be equipped, used and serviced by persons who are
familiar with it and have been instructed on the hazards. Repair works
may only be carried out by us or by a customer service agent nominated
by us.
This machine must not be used in potential explosive atmospheres.
Metallic parts (wires etc.) have unconditionally to be removed from the
material to be cut.
Risidual risks
Even if used properly, residual risks can exist even if the relevant safety
regulations are complied with due to the design determined by the intended
purpose.
Residual risks can be minimised if the “Safety instructions” and the “Normal
intended use” as well as the whole of the operating instructions are observed.
Observing these instructions, and taking proper care, will reduce the risk of
personal injury or damage to the equipment.
Danger of injury of fingers and hands by the tool (saw blade) or
work piece. Therefore, wear gloves (e.g. when replacing the saw blade).
Risk of injury when removing chips while the saw blade still rotates.
Only remove chips after the saw blade and the saw unit (motor) has
come to a standstill.
Injury by catapulted workpiece parts.
Throwback of the workpiece or workpiece parts.
Breaking or catapulting of saw blade.
Only operate the saw with complete and correctly attached safety
equipment and do not alter anything on the machine that could impair the
safety.
Emission of harmful wood dusts. Therefore, wear a dust mask.
Risk from electricity, by using non-standard electrical connections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for longer periods of
time without ear protection.
In addition, in spite of all the precautionary measures taken, non-obvious
residual risks can still exist.
Safe working
Woodworking machines can be dangerous if not used properly. If
electrical tools are used, the fundamental safety precautions must be
met to preclude the risks of fire, electric shock and injuries to persons.
Before starting this device, read and keep to the following advice. Also
observe the preventive regulations of your professional association and
the safety provisions applicable in the respective country, in order to
protect yourself and others from possible injury.
L
Pass the safety instructions on to all persons who work with the
machine.
L
Keep these safety instructions in a safe place.
Make yourself familiar with the equipment before using it, by
reading and understanding the operating instructions.
Be attentive. Be careful what you do. Behave sensibly when
working. Do not use the device when you are tired or under the
influence of drugs, alcohol or medicaments. One moment of care-
lessness when using the device can result in serious injuries.
Avoid abnormal posture. Provide a safe standing position and keep at
any time the balance. Do not lean forward.
Wear suitable work clothes:
− do not wear loose-fitting clothes or jewellery; they can catch in
moving parts.
− slip-proof shoes
− hairnet in case of long hair
Wear personal protective equipment:
− ear protection (Sound intensity level at workplace can exceed 85 dB
(A))
− safety goggles
− gloves when you replacing the saw blade
ONLY OPERATE the circular saw on a
− solid
− level
− slip-free
− vibration free surface
When the saw is connected to a chip exhaustor:
− Required air flow rate: 1150 m³/h,
negative pressure on the suction nozzle 1160 Pa at an air velocity of 20
m/s.
− Start the chip exhaustor before starting the machining.
Keep your workplace in an orderly condition! Untidiness can result in
accidents.
Take into consideration environmental influences:
− Do not expose the saw to rain.
− Do not use the saw in moist or wet ambience.
− Provide for good illumination.
− Do not use this saw near inflammable liquids or gases.
Never leave the saw unattended.
Adhere to national regulations that might specify an age limit for the user
of the unit.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BTH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BTH in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info