519910
15
Zoom out
Zoom in
Previous page
1/44
Next page
15
10
55
Abb. 13
Abb. 14
Abb. 15
Stecken Sie die Flachrundschrauben durch die Vierkantlöcher
in Teil 10
Stecken Sie je eine Unterlegscheibe (
Innendurchmesser
8,4) auf
Schrauben Sie die Teile 55 fest
Insert the flat round screws through the square holes in
part 10.
Place a washer (
inner diameter 8.4) on each of the
screws.
Firmly fasten the parts 55 with the screws.
Introduisez les boulons à têtes bombées dans les trous carrés
de la pièce 10
Placez respectivement une rondelle (
diamètre intérieur 8,4)
Vissez les pièces 55 et serrez-les
Steek de vlakke ronde schroeven door de vierkante gaten in
deel 10
Steek er een onderlegschijf (
binnendiameter 8,4) op
Schroef de delen 55 vast
Stick i planrundskruvarna genom fyrkantshålen i del 10
Trä på vardera en underläggsbricka (
innerdiameter 8,4)
Skruva fast del 55
Kurbel in dieser Lage nicht betätigen, dazu muß die Säge
betriebsbereit auf den Tischbeinen stehen
Do not actuate the crank in this position; the saw must first
stand on its table legs ready for operation.
Ne pas actionner le levier dans cette position, car il faudra
pour cela que la scie soit opérationnelle sur les pieds de table.
De kruk in deze positie niet bedienen, hiervoor moet de zaag
bedrijfsklaar op de tafelpoten staan.
aktivera inte veven i detta läge, för detta måste sågen stå
startklar på bordsbenen
Befestigen des Motors
Schrauben Sie den Motor wie in Abb. 14 u.15 gezeigt, fest.
Verwenden Sie ausschließlich die Schrauben mit dem
farbigen Gewinde, sonst Motorschaden möglich !!! (Garantie-
verlust)
Fastening the motor.
Bolt the motor in place as shown in Fig. 14 and 15
Use only the bolts with the coloured thread since
otherwise damages to the motor are possible !!! (loss of
warranty)
Fixation du moteur.
Vissez le moteur conformément aux illustrations 14 et 15.
Utilisez exclusivement les vis avec le taraudage coloré
étant donné que sinon, vous risquez d’endommager le
moteur !!! (Perte du droit de garantie)
Bevestigen van de motor.
Schroef de motor eraan, zoals getoond in afb. 14 en 15.
Gebruik uitsluitend de schroeven met het gekleurde
schroefdraad, daar anders beschadiging van de motor
mogelijk is !!! (Vervallen van de garantie)
Motorns fastsättning.
Skruva fast motorn enligt fig. 14 och 15.
Använd uteslutande skruvarna med färgad gänga, annars
kan motorn ta skada !!! (Garantirlust)
M6 x 30
Ø 8,4
M6 x 12 m.
farb. Gewinde
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BTA 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BTA 90 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info