520774
15
Zoom out
Zoom in
Previous page
1/160
Next page
14
Please refer to the attached assembly
and operating instruction sheet for refe-
rences to figure numbers in the text.
Description of device / spare parts
Pos.
no.
Designation Order
number
1
Adjusting wheel for clamping of saw
band
362665
2
Upper case door
3 Pushing stick holder
4
Pushing stick
362872
5
Circuit closer/breaker
362658
6
Lower saw band coping
7 Lower case door
8
Base frame
9
Belt gear
10
Lower band saw roll 362673
11
Crank for adjusting of belt tension
12
Table insert
362697
13 Saw table
14
Parallel stopper
362698
15
Saw band
362662
16
Upper band guidance
17 Upper band saw roll 362672
18
Adjusting wheel for saw band coping
362665
19
Upper saw band coping
20 Transverse adjustment saw table
21
Splinters suction socket
22
Base
23 Line cord
24
Motor
25
Adjusting wheel for upper band saw roll
26 Stopper guidance profile 362699
Proper use
The device is suitable for cutting wood, wood like materials
and plastics.
Round materials (logs, pipes, etc.) are not permitted to be
cut without a special device for this purpose.
When endwise sawing plain work pieces a suitable stop
angle must be used for a safe guidance.
Only materials that can be safely placed are allowed to be
cut.
The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included
in the instructions.
Follow the relevant accident prevention rules for operation
and other generally recognised health and safety at work
rules.
Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
Unauthorised modifications on the device exclude a liability
of the manufacturer for damages of any kind resulting from
it.
Only persons who are familiarised with the device and
informed about possible risks are allowed to prepare, ope-
rate and service this device. Repair works may only be car-
ried out by us or by a customer service agent nominated by
us.
This machine must not be used in an explosive environ-
ment or exposed to rain.
Metallic parts (wires etc.) have unconditionally to be re-
moved from the material to be cut.
Residual risks
Even if used properly, residual risks can exist even if the rele-
vant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the “Safety advices” and the
“Intended usage” as well as the whole of the operating instruc-
tions are observed.
Observing these instructions, and taking proper care, will re-
duce the risk of personal injury or damage to the equipment.
Risk of injury to fingers and hands by the tool (saw band)
or work piece, e.g. during saw band replacement.
Injury by catapulted workpiece parts.
Throwback of the workpiece or workpiece parts.
Breakage and expulsion of saw band.
Risk from electricity when using improper electrical connec-
tions.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
Emission of harmful wood dust when working without
shavings exhaustor.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
1
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BSV315 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BSV315 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info