519289
97
Zoom out
Zoom in
Previous page
1/101
Next page
Sägeblattwechsel – Replacing the saw blade – Remplacement de la lame
Výměna pilového listu Udskiftning af savdklinge Wisselen van het zaagblad
Pymiana pily Byte av sågblad
R4
Tragen Sie Schutzhandschuhe.
Entfernen Sie die Sechskantmutter und den Sägeblattflansch.
Ziehen Sie das Sägeblatt ab.
Säubern Sie die Flansche.
Der Einbau des Sägeblattes erfolgt in umgekehrter
Reihenfolge.
L Beachten Sie die Drehrichtung des Sägeblattes (siehe
Pfeil auf dem Sägeblatt).
Zum Schluss die Schutzhaube wieder montieren.
Wear safety gloves.
Remove the hex nut and the saw blade flange. Pull the saw
blade off.
Clean the flange.
Fit the new saw blade in reverse order.
L Note the direction in which the saw blade turns (see
arrow on saw blade).
Finally, fit the safety guard again.
Portez les gants de protection.
Enlevez l‘écrou à six pans et la bride de la lame de scie.
Retirez la lame de scie.
Nettoyer les brides.
Le montage de la lame de scie s‘opère dans l‘ordre
inverse.
L Observez le sens de rotation de la lame de scie (voir
flèche sur la lame de scie).
Enfin, installez à nouveau le capot de protection.
Používejte ochranné rukavice.
Odstraňte šestihrannou matici a přírubu listu pily. List pily
stáhněte.
Vyjměte vložku stolu (6).
Vestavba listu pily se provádí v opačném pořadí.
L Dbejte na směr otáčení listu pily (viz šipku na listu pily).
Závěrem znovu namontujte ochranný kryt.
Bær beskyttelseshandsker.
Fjern sekskantmøtrik og savklingeflange. Træk savklingen af.
Rengør flangen.
Montering af savklingen sker i omvendt rækkefølge.
L Bemærk savklingens drejeretning (se pil på savklingen).
Monter til beskyttelse beskyttelsesafdækningen igen.
Draag veiligheidshandschoenen.
Verwijder de zeskante moer en de zaagbladflens. Trek het
zaagblad af.
Reinig de flens.
De inbouw van het zaagblad gebeurt in omgekeerde
volgorde.
L Neem de draairichting van het zaagblad in acht (zie pijl
op het zaagblad).
Tenslotte de schutkap weer monteren.
96
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BMS250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BMS250 in the language / languages: English, German, Dutch, Danish, French, Polish, Swedish as an attachment in your email.

The manual is 4,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info