475724
29
Zoom out
Zoom in
Previous page
1/135
Next page
29
P
P
o
o
s
s
s
s
i
i
b
b
l
l
e
e
f
f
a
a
u
u
l
l
t
t
s
s
Before each fault clearance
switch off device
wait for stop of chain saw
apply the chain brake
pull off the spark plug connector
wear gloves
After each fault clearance, put into operation and recheck all security installations.
Fault Possible cause Removal
Motor does not start  Incorrect starting sequence
 Air filter contaminated
 Fuel filter fouled
 Spark plug fouled
 No fuel supply
 Fault in the fuel line
 Cranking mechanism defective
 Engine flooded.
 Carburettor defective
 Observe the correct starting sequence
 Clean or replace the air filter
 Clean or replace the fuel filter
 Clean or replace the spark plug
 Fill the fuel tank. Bring the choke to the
correct starting position. Clean or replace
the fuel filter
 Check the fuel line for kinks or damages
 Replace the cranking rope: Replace the
recuperating spring
 Screw off, clean and dry the spark plug.
Then pull the cranking rope several times
and reinstall the spark plug.
 Contact the customer service
Engine starts and is stalled
immediately
 Incorrect idle adjustment  Contact the customer service
Chain saw does not work with
full power
 Machine overloaded.
 Chain edgeless/damaged
 Air filter contaminated
 Carburretor incorrectly adjusted
 Silencer blocked
 Do not excessively press during sawing
 Chain must be regrinded or exchanged
 Clean or replace the air filter
 Contact the customer service
 Clean the outlet of the silencer
Chain saw works with
interruptions (sputters)
 Carburretor incorrectly adjusted
 Spark plug fouled
 Contact the customer service
 Clean or replace the spark plug. Check the
spark plug connector
Chain does not run
 Chain brake applied
 Release chain brake
Chain saw picks, vibrates or
does not saw correctly
 Chain edgeless/damaged
 Chain tension
 Chain not assembled correctly (teeth face to
wrong direction)
 Chain must be regrinded or exchanged
 Check and adjust chain tension
 Assemble chain again
Saw chain is hot  no oil in the tank
 oil flow canal blocked
 chain tension too high
 Chain edgeless
 Incorrect chain lubrication
 Refill oil
 Clean oil flow canal
 Adjust chain tension
 Chain must be regrinded or exchanged
 Adjust the chain lubrication
no saw chain lubrication  no oil in the tank
 oil flow canal blocked
 Incorrect chain lubrication
 Refill oil
 Clean oil flow canal
 Adjust the chain lubrication
Smoke  Incorrect fuel mixture
 Carburretor incorrectly adjusted
 Use two-stroke oil, ratio of mixture 40:1
 Contact the customer service
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BKS 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BKS 45 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info