519868

Atika Bioplus 2400 Manual

16
Zoom out
Zoom in
Previous page
1/62
Next page
14
Special informations on the shredding procedure:
Branches, twigs and wood should be broken down
immediately after they have been cut
− material of this kinds gets very hard when it is dry, and it
therefore makers sense to reduce the maximum branch
diameters, so that it is ready for shredding.
Remove any side shoots from branches with a large
number of twigs.
How to shred garden and kitchen waste with hight water
content and a tendency to clog
− to prevent the machine from clogging, alternate waste
with wood containing material.
Do not allow the shredded material to pile up too high in the
area of the ejection opening. This can lead to shredded
material blocking the ejection channel, and backing up to the
filler opening.
Clean out the filler opening and ejection channel thoroughly if
the machine becomes blocked. Before doing this, switch the
motor off and disconnect the machine from the mains power
supply.
Please do not exceed the maximum branch diameter
specified for your appliance (∅ see p. 15).
The blades largely pull the material into the machine by
themselves.
Strong branches may cause overloading. This can be
avoided by pulling them back from time to time.
If the machine is overloaded, a protective motor switch
ensures that the machine turns itself off automatically
− turn the shredder on again after about 5 minutes
− during those five minutes you cannot turn the machine,
see point „Operational faults“.
C
C
h
h
a
a
n
n
g
g
i
i
n
n
g
g
t
t
h
h
e
e
b
b
l
l
a
a
d
d
e
e
s
s
Remove the mains plug before changing the
blades.
Risk of injury to the fingers and hands when carrying out
work on the blade unit. Wear protective gloves.
Fix the blade.
Reduced output
One edge of the knife has become blunt
Turn knife so that you can use the other edge
Both edge of the knives have become blunt
replace with sew set of knives (order-no. 384547)
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
a
a
n
n
d
d
C
C
a
a
r
r
e
e
Remove the mains plug before maintenance
and care.
Take care when maintaining the cutting equipment to ensure
that the cutters can still be operated by the starter
mechanism, even if the motor is not running because the
cover has been unlocked.
Wear protective gloves.
Generally garden shredders require little maintenance.
L
To maintain their efficiency and a long life, observe
the following:
• After shredding, the machine must be cleaned inside
and outside
• Slightly grease polished metal components immediatley
after use (to prevent rusting)
S
S
p
p
a
a
r
r
e
e
p
p
a
a
r
r
t
t
s
s
Please refer to the drawing and list for spare.
Ordering spare parts:
− Available from the manufacturer
− Orders must quote the following inforation:
• Colour of appliance (for housing parts)
• Spare parts no.
• Quantity required
• Shredder model
• Name of the garden shredder
Example: orange, 382062, 1, BioPlus 2450, AH 402
PZ 3
Left-hand
thread
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika Bioplus 2400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika Bioplus 2400 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info