Manual Atika Bioline 2400 (page 21 of 39) (English, German, Dutch, French, Italian)

519867

Zoom out

Zoom in

1/39

2. Safety Instructions

Machine including safety cut-out

The safety cut-out, including an automatic motor

brake, which is attached to the shredder is used

for the safety of the machine, preventing the

motor being started when the machine is open

and the rotating knives could be reached by the

operator’s hand.

Repairs on electrical parts of the machine and

on the safety cut-out must be done by the

producer or by a company designated by the

producer.

Please read the following

safety instructions carefully.

• Within his area of work the operator is

responsible for third parties.

• The machine must not be used by opera-

tors under the age of 16.

• Keep children away form machine.

• Wear protective goggles, gloves and noise

protection while working with the machine.

• The connecting lead to IEC 60245

(H 07 RN-F) should be equipped with a

rubber plug. The lead section should be

a minimum of 3 x 1,5 mm².

• Never use faulty connecting leads.

• Connect the machine using a residual

current petector.

• Always switch off motor before main-

tenance and cleaning of shredder.

Remove mains plug from socket (also

during transport and when leaving

machine unattended).

• Do not operate without the funnel.

• Close machine properly before enabling

motor.

• Faulty or damaged parts in the device

must be replaced immediately.

• Never reach into the filling or ejection

opening when the machine is running.

• Do not spray machine with water (this

is hazardous due to live components).

• Wear safety gloves during assembly

and cleaning work.

• Never modify the machine or parts thereof.

• Only use the machine for the purposes

listed under Section 4 "Shredding".

• Do not leave the machine standing in

the rain or use when raining. Store the

machine in a dry place.

• To prevent danger of injury to fingers during

assembly or cleaning operations hold the cut-

ting mechanism (for example by means of a

wooden wedge, see. pic. p. 21) and wear

protecting gloves.

3. Start-up

• Check that the machine is completely and

correctly assembled.

• To avoid toppling, place the chopper on a firm

horizontal surface.

• Connect the machine to an appropriate and

correctly wired electric socket.

• Only use extension leads with sufficient dia-

meters:

- cable up to 25 metres: diameter at least

1,5 mm².

- cable over 25 metres: diameter at least

2,5 mm².

• Fuse protection:

- 1100 W, 1200 W: 10 A

- 1300 W, 1400 W, 1500 W,

1600 W, 1700 W: 10 A inert

- 1800 W, 1900 W, 2000 W: 16 A

- 2100 W, 2200 W, 2300 W

2400 W: 16 A inert

- for UK use 13 A fuse (all models)

• Before using the shredder, make sure each

time that

- there are no faulty connections (tears, cuts,

etc.)

- all screws are tight.

Important:

Before using the shredder for the first time,

close top of case and screw tight.

Switch on and off

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Atika Bioline 2400 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Atika Bioline 2400 Manual

Product: