519866

Atika Bioline 1600 Manual

23
Zoom out
Zoom in
Previous page
1/39
Next page
22
7. Operational faults
Problem Possible cause Elimination
Motor does not start - no mains voltage
- defective connection cable
- enclosure top improperly closed
(safety shut-off is activated)
- check fuse
- have it inspected (electrician)
- close and bolt down enclosure top
correctly, remove any dirt present
Motor turns over, but does
not start
- cutters blocked
- defective capacitor
- switch machine off, disconnect
mains plug, and clean interior of
machine
- have machine repaired by manu-
facturer or approved company
Motor starts, but becomes
blocked on encountering
even slight pressure, and is
switched off via motor safety
switch.
Extension cable too lang, or cross-
section too small. Socket too far
away from main connection, and
cross-section of connection lead too
small
.
Extension cable at least 1,5 mm²,
maximum 25 m long. Cross-
section of at least 2,5 mm² in
longer cables.
8. Warranty
∗ The manufacturer will supply a two years warranty after supply of the machine from the dealer’s store
for faults in material and/or workmanship.
∗ Warranty claims, even during the warranty period, will not be accepted for damages due to incorrect
handling or inadequate packaging during return of the devices or to a non-observance of the
operating instructions
.
∗ Faulty components should be returned to the factory, postage and freight paid. Discretion for the
supply of replacements free of charge will remain with the manufacturer.
∗ All warranty work will be carried out by the manufacturer. The handling of repairs by third parties shall
require prior written consent of the manuacturer.
∗ The warranty will only apply of original spare parts are used.
∗ Subject to alterations due to further development.
Electrical mains supply impedance
When conditions in the electrical mains supply are unfavourable, voltage reductions for short periods can
occur during the process of turning on the equipment, which can adversely affect other equipment (e.g.,
the flickering of a lamp).
No breakdowns are to be expected if the maximum, electrical mains supply impedances given in the
table are met.
Power consumption P
1
(watts)
Electrical mains supply impedance Z
max
(Ω)
1300 – 1400 0,36
1600 – 1700 0,35
1800 – 2000 0,25
2200 – 2400 0,24
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika Bioline 1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika Bioline 1600 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info