555729
14
Zoom out
Zoom in
Previous page
1/104
Next page
12
Motor protection
The motor is equipped with a protective circuit breaker and
switches off automatically in case of overloading. After a
cooling-down break (approx. 15 min), the motor may be
restarted.
Release the switch lever (2) because the device will
otherwise restart immediately after it has cooled down.
Risk of injury!
Working instructions
Before commencing work, ensure the following:
You may not start to operate the machine until you have
read these original instructions, observed all the instructions
given and installed the machine as described!
Provide for a safe and cleaned workplace. Remove from the
working area objects which might be thrown off.
Before starting your work make sure that:
the tools and bolts are not worn or damaged. To avoid
any unbalance worn or damaged tools and bolts must
only be replaced as a whole set.
drum and blades are in proper condition
all screw connections are tight
no other persons or animals stay within the working area,
you can always step back without any barriers,
you have always a secure standing position.
Always keep your hands and feet at a safe distance to
the rotating tool.
Vibration
If persons who have blood circulation problems are too
often exposed to vibrations damages to the nervous system or
to blood vessels may occur.
You can reduce vibrations
by thick and warm working gloves,
shorter working time (have longer breaks).
See a doctor if your fingers swell, you don’t feel well or your
fingers become numb.
Working with the tiller
The device can be used for diging over and for mixing up
of ground areas.
Risk of injury by flying around objects.
Make sure that the blade guard is attached.
Place the device at the edge of the ground near the
receptacle.
Move the cable after each turn to the opposite already
worked side. Â
Make sure not to place excessive strain on the device.
L In case of excessive strain, the motor speed drops and
the motor noise changes.
Î Stop and release the switch lever (2)
Î Wait until the blade drum stands still
Move the device at an appropriate uniform speed in straight
lines across the ground.
When working on slopes, always position yourself perpendi-
cular to the incline and ensure safe footing. Do not scarify on
steep slopes.
In any case, adhere to all safety notes (see "Safe
working").
Maintenance and cleaning
Before each maintenance and cleaning
work:
switch off device
wait until the drum is stationary
pull out main plug
Maintenance and cleaning activities beyond those described in
this chapter may only be performed by customer service.
For maintaining and cleaning, removed security devices must
unconditionally be mounted properly and proved again.
Use only original parts. Other parts can result in unexpected
damages and injuries.
To make sure that the device is in a safe condition regularly
check the device for apparent defects such as
loose fastening elements (nuts, bolts, screws),
worn or damaged components.
Maintenance
Blade drum
Risk of injury! Wear protective gloves when
working on the blade drum.
Worn blades reduce the performance of the device and put
excessive strain on the motor. Therefore check the condition of
the blades before each use. If required, have the blade drum
replaced by a new one by your authorized service personnel.
Cleaning
L
Clean the device carefully after each use to ensure
faultless function to be maintained.
Risk of injury! Wear protective gloves when
working on the blade drum.
Remove the dirt with a cloth or brush.
Clean the device immediately after finishing the work.
Clean the bottom of the device and the blade drum.
Clean the housing, especially the vent slots, from dirt stuck
to it.
Do not clean the machine with running water or high-
pressure cleaners.
Do not use solvents for the synthetic parts (petrol, alcohol,
etc.) as these can damage the synthetic parts.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BH 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BH 800 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atika BH 800

Atika BH 800 Installation Guide - English, German, Dutch, French, Italian, Polish - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info