520102
43
Zoom out
Zoom in
Previous page
1/129
Next page
43
Fault code Possible cause Corrective action
The brushcutter does
not work with full output
Cutting blade dull or damaged
Device overloaded as grass too high.
Have the cutting blade sharpened or replace it
Trim the grass in several passes.
The grasstrimmer does
not work with full output
Cutting thread too short/broken.
Device overloaded as grass too high.
Follow up the cutting thread.
Trim the grass in several passes
Cutting thread is not
followed up.
No more thread on the spool.
Cutting thread entangled.
Replace the thread spool.
Recoil the cutting thread.
Cutting device gets hot Missing lubrication friction
Not enough play
Cutting blades are blunt
Oil the cutting device
Adjust the sliding play
Have the cutting device sharpened
Power pruner picks,
vibrates or does not
saw correctly
Chain edgeless
Chain worn
Chain not correctly stretched
Chain not assembled correctly (teeth
face to wrong direction)
Chain must be regrinded or exchanged
Exchange chain
Check and adjust chain tension
Assemble chain again
Saw chain gets hot No oil in the tank
Oil flow canal blocked
Chain tension too high
Chain edgeless
Refill oil
Clean oil flow canal
Adjust chain tension
Chain must be regrinded or exchanged
No saw chain
lubrication
No oil in the tank
Oil flow canal blocked
Refill oil
Clean oil flow canal
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BFSGT30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BFSGT30 in the language / languages: English, German, Dutch, French, Italian, Swedish as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info