519909
12
Zoom out
Zoom in
Previous page
1/80
Next page
10
Technical data
Model designation TKS 250 C (ATS 250)
Motor output P
1
1700 W
Mains voltage 230 V~
Mains frequency 50 Hz
Saw blade speed 4500 min
–1
Mains fuse 10 A inert
Hard metal saw blade maximum 250 mm
Hard metal saw blade minimum 245 mm
Saw blade thickness 1,8 mm
Cut width 2,8 mm
Number of teeth 36
Thickness of Splitting wedge 2 mm
Saw blade location hole 16 mm
Cutting speed (at maximum saw blade ) 59
m
/
s
Cutting height at 90° (for maximum saw blade ) approx. 76 mm
Cutting height at 45° (for maximum saw blade ) approx. 67 mm
Bevel cut adjustment (swivelling range) 0° - 45°
Table size (without extension) 640 x 470 mm
Table height (with stand) * 880 mm
Table length extension * 640 mm x 255 mm
Table width extension * ca. 35 kg
Weight (with stand) * ca. 33 kg
Exhaust outlet guard 30 mm
Exhaust outlet 30 mm
Commercial, small dust collectors or industrial vacuum cleaners are used for vacuuming.
* Only for ATS 250 TOP
You must not start up the machine until you have read these operating instructions, observed all the
information given and assembled the machine as described.
Keep the instructions in a safe place for future use.
Contents
Declaration of conformity 1
Technical data 10
Symbols used in the operating instructions 10
Extent of delivery 11
Characteristic noise values 11
Normal intended use 11
Residual risks 11
Safe working 12
Preparation for commissioning 13
Commissioning 13
Adjusting the saw 14
Working instructions 15
Maintenance and care 16
Transport 16
Storage 16
Guarantee 16
Possible faults 17
Assembly of the saw 66-70
Spare parts list 71
Symbols used in the operating instructions
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or cause
damage to property.
L
Important information on proper handling of the
saw. Not observing this instruction can lead to faults in
the saw.
User information. This information helps you to use all
the functions of the saw optimally.
œ
Assembly, operation and servicing the saw. Here
you are explained exactly what to do.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika ATS 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika ATS 250 in the language / languages: English, German, Dutch, Danish, French, Polish, Swedish as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info