520736

Atika ASP 10 T Manual

27
Zoom out
Zoom in
Previous page
1/148
Next page
26
2. Release one control handle so that the blade stays in this
position.
3. Switch the machine off and disconnect the power.
4. Release the second control handle.
5. Shorten the return
path at the rod fitted
to the side by fixing
the holding screw at
the necessary height.
Adjusting the table height
Upper table plate position: 610 mm
Middle table plate position: 890 mm
Lower base position: 1370 cm
1. Split logs up to 590 mm on the table plate.
Secure the table plate using the locking bolt.
(The locking bolt engages in the table plate hole.)
2. Split logs up to 870 mm on the table plate.
3. Split logs up to 1350 mm on the base. Pull out the table
plate.
Adjusting the splitting cross:
1. Loosen star grip
screw.
2. Move the splitting
cross to the
correct position
(The star grip
screw is beyond
the borehole in the
splitting blade).
3. Mount star grip
screw.
Splitting short wood:
1. Upper position of table plate.
2. Place the log on the splitter’s table plate.
3. Hold the log tight with the clamping claws.
L Only split the logs in the direction of the wood fibres.
Splitting long wood:
1. Middle position
of table plate or
low position of
base.
2. Remove the
splitting cross.
3. Place the log on
the splitter’s
table plate or
base.
L Possible malfunction when cleaving logs: The log to be
cleaved is not cleaved right through, jams on the cleaving blade
and is pulled up during the blade’s return movement.
In this case, proceed as follows:
1. Switch off the device.
2. Depending on the log still to be cleaved fix the table plate in
the upper or the the middle position.
3. Switch on the device and continue the splitting operation.
Never try to split two logs at once.
Never try to remove or replace the log during the
splitting process.
L Never try to force the splitting of the log by maintaining the
pressure for several seconds. This can lead to damage to the
machine.
Position the log on the table again and repeat the splitting phase,
or put the log on one side.
Holding
screw
Star grip screw
Splitting cross
Locking bolt
Table plate
Base
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika ASP 10 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika ASP 10 T in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Finnish as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info