Manual Atika ASP 10 N (page 27 of 147) (English, German, Dutch, French, Italian, Polish, Swedish, Finnish)

520732

Zoom out

Zoom in

1/147

4. Press both operating handles down simultaneously:

Î The splitting blade falls down and splits the log.

5. Release the two control handles, the splitting blade returns to

its initial position.

L If you only release one control handle, then the splitting

blade remains where it is.

 Special instructions for splitting logs:

 Preparations:

The logs to be split should be cut to the maximum dimensions.

Ensure also that the logs are cut straight and square.

Place the log properly on the log splitter, so as not to cause any

risk of stumbling or falling to the operator.

 Adjusting the stroke height

In case of shorter wood pieces the efficiency can be increased by

shortening the return of the splitting cutter.

1. Place the log on the

splitting table and

press the two control

handles to bring the

splitting blade down to

approx. 2 cm above

the log.

2. Release one control handle so that the blade stays in this

position.

3. Switch the machine off and disconnect the power.

4. Release the second control handle.

5. Shorten the return

path at the rod

fitted to the side by

fixing the holding

screw at the

necessary height.

 Adjusting the table height

Upper table plate position: 590 mm.

Middle table position: 900 mm.

Lower base position: 1300 cm.

1. Split logs up to 590 mm on the table plate.

Secure the table plate using the locking bolt.

(The locking bolt engages in the table plate hole.)

2. Split logs up to 900 mm on the table. Pull out the table

plate.

3. Split logs up to 1300 mm on the base. Press the locking lever

down and swing aside the table.

Locking bolt

Table plate

Table

Base

Locking lever

Holding

screw

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Atika ASP 10 N in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Finnish as an attachment in your email.

The manual is 6,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Atika ASP 10 N Manual

Product: