520104
16
Zoom out
Zoom in
Previous page
1/144
Next page
16
Fault Possible cause Remedy
Shredding material is not
drawn into the shredder
- The cutting roller is running in reverse.
Wrong switch position.
- Shredding material caught in funnel
- Shredding material too soft or wet
- Cutting roller worn
- Switch off device and switch over direction of rotation
selector switch.
- Switch off device. Switch the direction of rotation
selector switch into position
. Switch on device to
release the material to be shredded, remove any
foreign matter.
Switch off device again. To continue work, place the
direction of rotation selector switch back into position
.
- Push down with a branch and shred
- Adjust fixed counter blade as described under „adjust-
ing the fixed counter blade“. In case of severe wear,
replace cutting roller.
Shredding material not cut
cleanly
- Fixed counter blade not adequately ad-
justed
- Adjust fixed counter blade
Device starts but blocks
under as slight load and
switches off via protective
motor switch.
Extension cable too long or cross-section to
small.
Socket too far from mains supply and cross-
section of mains cable too small
Extension cable at least 1.5 mm², maximum 25 m long. If
a longer cable is used, minimum cross-section 2.5 mm².
T
T
e
e
c
c
h
h
n
n
i
i
c
c
a
a
l
l
d
d
a
a
t
t
a
a
Model/type
ALA 2800
Year of contruction see last page
Motor AC-Motor 230 V~, 50 Hz, 2800 rpm
Motor rating P
1
S6 - 40 % 2800 W
Rotational speed cutting roller 40 min
-1
ON/OFF-switch with overload protection; cutting and reverse function, zero-voltage initiator
Weight 26.5 kg
Sound pressure level at work L
PA
(measured to 2000/14/EC)
82,5 dB (A)
K = 3 dB (A)
Measured sound power level L
WA
(measured to 2000/14/EC)
91 dB (A)
Guaranteed sound power level L
WA
(measured to 2000/14/EC)
92 dB (A)
Max. branch diameter
(only for freshly cut wood)
max. 44 mm
Safety class I
Protection class IP X4
Mains fuse
Switzerland
UK
16 A time-lag
--
13 A time-lag
G
G
u
u
a
a
r
r
a
a
n
n
t
t
e
e
e
e
Please observe the enclosed terms of guarantee.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika ALA2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika ALA2800 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info