555721
13
Zoom out
Zoom in
Previous page
1/44
Next page
Do not operate machine before having read the
operating instructions, understood all the notes
and assembly the machine as described here.
12
Keep the instructions in a safe place for future use.
Contents
EC Declaration of Conformity 12
Extent of delivery 12
Characteristics noise values 12
Symbols machine / operating manual 12/13
Normal intended use 13
Residual risks 13
Safe working 13
Before the first start-up 15
Start-up 15
Working with the surface planing and thicknessing
machine
16
Maintenance and cleaning 18
Transport 18
Storage 19
Guarantee 19
Maintenance and cleaning schedule 19
Description of device / spare parts 20
Possible faults 20
Technical data 21
EC Declaration of Conformity
according to EC directive 2006/42/EC
We,
ATIKA GmbH & Co. KG
Schinkelstraße 97
59227 Ahlen - Germany
herewith declare under our sole responsibility that the product
Surface planing and thicknessing machine
Type MB Y 10 / model ADH 254 A
Serial number: 00001 - 05000
is conform with the above mentioned EC directive as well as with
the provisions of the guidelines below:
2004/108/EC and 2006/95/EC
Following harmonized standards have been applied:
EN 861:2007+A1; EN 60204-1:2006+A1; EN 55014-1:2006;
EN 55014-2:1997+A1; EN 61000-3-2:2006; EN 61000-3-11:2000
EC type examination carried out by:
TÜV Rheinland LGA Products GmbH
Certificat-no.: BM 50176726 0001
Keeping of technical documents at:
ATIKA GmbH & Co. KG – Technical department
Schinkelstr. 97 – 59227 Ahlen – Germany
Ahlen, 24.01.2011 A. Pollmeier, management
Extent of delivery
Surface planing and thicknessing machine ADH 254 A
Shavings exhauster hood
Shavings exhauster connector
1 push stick
Blade shaft guard
Guide plate
Stand
Installation tools
Fasteners
Operating manual
After unpacking, check the contents of the box
! That it is complete
! Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Characteristics noise values
EN ISO 3744
Machine used as surface planer and thicknesser with standard
cutting blades.
Noise power level
Sound pressure level
at the workplace
No-load L
WA
= 109,5 dB(A) L
pA
= 93,9 dB(A)
Load
Planing
L
WA
= 112,3 dB(A) L
pA
= 99,3 dB(A)
Load
Thicknessing
L
WA
= 111,3 dB(A) L
pA
= 97,9 dB(A)
The factor of measurement uncertainty is 2 dB.
The values given are emission values and must therefore not
simultaneously represent safe workplace values too. Although there is
a relationship between emission and immersion levels, it can be
reliably deduced whether additional precautionary measures are
necessary or not. Factors, which can influence the immersion level
currently existing at the workplace include the duration of the effects,
the special type of the workroom, other noise sources, etc. e.g. the
number of machines and other adjacent processes. The permissible
workplace values can also vary from country to country. This
information should however enable an improved assessment of the
danger and risk to be carried out.
Symbols machine
Carefully read
operator’s manual
and the safety in-
structions before
starting the machine
and observe the
instructions when
operating.
Before starting any
repair,
maintenance or
cleaning work,
always switch off
the motor and
remove the plug
from the socket.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika ADH 254 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika ADH 254 A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atika ADH 254 A

Atika ADH 254 A Installation Guide - English, German, Dutch, French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info