765267
54
Zoom out
Zoom in
Previous page
1/68
Next page
Chapter 4 – Functions of the instrument
UM-27200G-U User manual ATEQ VT520 Page 44/56
This message does not block the instrument and
disappears after a few seconds. It informs that a
parameters saving could be necessary. In this case
three solutions appear:
SAVE PARAMETERS
1) Restore the saved parameters (current parameters will be lost).
2) Save the current parameters in the memory (the parameters already in the memory
will be lost).
3) Do nothing and work with the current parameters.
5. RESULTS MENU
This function is used for the:
9 detailed display of the test results: number of parts tested, number of Pass parts,
number of Fail reference parts, number of Fail test parts, number of re-workable
parts, number of times the alarm is triggered (each indicator is expressed as a %
value), .
9 resetting of the results memory,
9 printing of the results (number of good parts, number of bad parts)
6. LANGUAGE MENU
This function is used to select the language displayed by the instrument. Several
languages are available. Two languages can be stored in the instrument when it is
manufactured, English by default and one other optional language.
7. STAND BY MENU
This function is used to switch off the instrument without disconnecting it. Standby can
be immediate or programmed with start and stop times.
There are two ways to achieve immediate standby:
1) Either through the standby menu,
2) Or by pressing the RESET key for more than three seconds.
Note: when the instrument is in standby mode, the
display is off and only the yellow indicator light
flashes approximately every 3 seconds.
TX PASS FAIL
To reactivate the instrument, simply press any key
on the front panel or activate any input.
ATEQ VT5
Version XX.XXi
) Select the option and enter settings if necessary.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ateq VT520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ateq VT520 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info